HVR高清数字硬盘录像机 英文版使用说明.doc

4.4.9 Digital Manager Channel manage including : Digital channel, Channel status, Channel mode： Digital Channels： 【Channel】select channel title； 【Enable】Open digital channel, tick enable, then can do related settings； 【Time Synchronization】Tick it means the time of this channel and device is the same. 【Connection Mode】can be singe connect or multi-ink, multi-link modes can connect to several devices, device will be tour displayed one by one, tour interval can be set, no less then 10s; 【Delete】If the user want to change device, select the existing device, click delete will be ok. 【Add】click add will come out below page to add new device： 【Configur Name】device is with default config title, user can revise it as you like； 【Device Type】3 types: IPC、DVR、HVR，user can choose as what you like, default is IPC； 【Protocol】Default is TCP 【Remote access】User can input remote channel title from the device that you want to connect remotely； 【Stream】Default is main stream, do not support extra-stream at present； 【Device address】IP address of device. 【Port】Default is 34567； 【User name】Default is admin Remark: click 【search】will show all the devices that searched out, user can choose any of the device that you like. Channel Status： Channel status is to show the status of all the digital channel, including Max Resolution, This Resulution, Connection Status. For example: The channel status for 4+2 mode is as below: Below page shows: channel D01 connected with device, and it was online. Channel D02 D03 connected with devices but offline, channel D04 with NO device connected. Below page means: Under all digital channel mode, only one channel with device connected but not online. Remark: when This Resolution is over Max Resolution, when preview it, will show a red X, as beow: Under all digital channel mode, Max resolution of channel 3 is D1, if it was connected to a device with resolution over D1 ( such as 960H), you will see below pic: