ansys_Chap07.ppt

ANSYS工程分析 Chapter 7 ANSYS命令: 解題與後處理 Solution and Postprocessing Contents 7.1 負載 Loads 7.2 解題與解題參數的設定 Solution and Solution Options 7.3 一般後處理 General Postprocessing 7.4 歷時後處理 Time-History Postprocessing 7.5 練習題: 簡支橋樑設計 Exercise: Design of a Simply Supported Bridge 第7.1節 負載 Loads 7.1.1 Loads on Analysis Model (1/5) 7.1.1 Loads on Analysis Model (2/5) 7.1.1 Loads on Analysis Model (3/5) 7.1.1 Loads on Analysis Model (4/5) 7.1.1 Loads on Analysis Model (5/5) 7.1.2 Loads on Solid Model (1/2) 7.1.2 Loads on Solid Model (2/2) 7.1.3 Initial Conditions 第7.2節 解題與解題參數的設定 Solution and Solution Options 7.2.1 Solution Options 7.2.2 Solve the Model 7.2.3 *GET Command 第7.3節 一般後處理 General Postprocessing 7.3.1 PLESOL PLNSOL 7.3.2 /POST1 Basic Commands 7.3.3 Element Table 7.3.4 Element Tables Commands 7.3.5 Pathing 7.3.6 Path Operations Commands 7.3.7 Graphics Control Commands 7.3.8 /POST1 “*GET Items” 第7.4節 歷時後處理 Time-History Postprocessing 7.4.1 /POST26 Basic Commands 7.4.2 /POST26 “*GET Items” 第7.5節 練習題: 簡支橋樑設計 Exercise: Design of a Simply Supported Bridge * ANSYS工程分析 D, NODE, Lab, VALUE DSYM, Lab, Normal, KCN DCUM, Oper 01 02 03 DOF Constraints F, NODE, Lab, VALUE FCUM, Oper 04 05 Concentrated Forces (Pointed Forces) SF, Nlist, Lab, VALUE SFE, ELEM, LKEY, Lab, KVAL, VAL1? SFBEAM, ELEM, LKEY, Lab, VALI, VALJ SFCUM, Lab, Oper 06 07 08 09 Distributed Forces BF, NODE, Lab, VAL1 BFE, ELEM, Lab,, VAL1 BFUNIF, Lab, VALUE TUNIF, TEMP TREF, TREF BFCUM, Lab, Oper ACEL, ACELX, ACELY, ACELZ OMEGA, OMEGX, OMEGY, OMEGZ, KSPIN 10 11 12 13 14 15 16 17 Body Forces Stress Stiffening and Spin Softtening DK, KPOI, Lab, VALUE,, KEXPND? DL, LINE, AREA, Lab, Value1 DA, AREA, Lab, Value1 DTRAN 01 02 03 04 RECTNG, -5, 5, -5, 5 PCIRC, 2 ASBA, 1, 2 CSYS, 1 ESIZE, 1 ET, 1, PLANE42 AMESH, ALL KSEL,, LOC, X, 2 DK, ALL, ALL, 0,, 1 DTRAN /PBC,U,,1 EPLOT 101 102 103 104 105 106 107 108 109 110 111 112 FK, KPOI, Lab, VALUE FTRAN SFL, LINE, Lab, VALI, VALJ SFA, AREA, LKEY, Lab