检验报告T11-AJ.doc

 检 验 报 告 TEST REPORT NAME OF SAMPLE: 汽车铝合金车轮 CLIENT: 芜湖宝德轮业有限公司 CLASSIFICATION OF TEST: SGS审核检验 芜湖宝德轮业有限公司实验室 Wuhu Pilotdoer Wheel Co., Ltd.Laboratory 中国安徽省芜湖市机械工业园区工业大道纬五路.241000 Weiwu Road,Industry Av,Machinery Industrial Zone Wuhu City,Anhui Province,China.241000 芜湖宝德轮业有限公司 检 验 报 告 TEST REPORT Name of product: 产品名称：Trade mark: 商标 Type/Model: 种类/型号： Sample status: 样品状态： Manufacturer: 制造商： Commissioned by: 委托： Manufacturer address: 制造商地址：Quantity of sample: 样品数量： Sampled by: 取样：Sample identification: 样品识别： Sampling at (place): 抽样（地方）：Means of receiving: 接收手段： Means of sampling: 抽样的方式： Classification of test: 分类试验： Sampling date: 取样日期： Receiving date: 接收日期： Completing date: 完成日期： Test item: 试验项目 Tested according to: 根据测试：ABNT NBR 6752:2009标准及SGS审核方提供的技术参数(ABNT NBR 6752:2009 standards and SGS audit to provide technical parameters) Test conclusion: 该样件按ABNT NBR 6752:2009标准及SGS审核方提供的技术参数检验，所有项目合格(The prototype according to the ABNT NBR 6752:2009 standards and SGS audit to provide technical parameters testing, all qualified) Seal of jixiang yang Date of issue: 2012-11-15 Approved by: Reviewed by: Tested by: 芜湖宝德轮业有限公司 检 验 报 告 TEST REPORT NO Inspection item Requirement – Test Result Verdict 1 Impact test ( sample recognition 1, 2) The heavy hammer 540Kg ± 2%, 230± 2MM, falling height, pressure 200Kpa, impact position gas nozzle holes and spokes ( gas nozzle holes corresponding to the position of the position ) 1 spoke any section can not appear visually visible crack; ( impact punch contact surface no longer range of investigation ) 2 may not appear spoke from a rim of the separation phenomenon; 3 tire