ESD Contrlol.doc

Confidential People Committed To InfoTech ESD CONTROL PROGRAM REVISION : A Date:11/9/1999 Prepared By:______________________________ Gyver Lo Approved By:______________________________ W.C.Wang MITAC INTERNATIONAL CORP. TAIPEI OFFICE : 8TH FL., NO.75, MING SHENG E. RD., SEC.3, TAIPEI, TAIWAN, R.O.C. TEL:886-2-5018231 TELEX:11942 TAIAUTO FAX:886-2-5014265 FACTORY:1,RD ROAD 2. HSINCHU SCIENCE-BASED INDUSTRIAL PARK, HSINCHU, TAIWAN, R.O.C. TEL:886-35-779250 FAX:886-35-776209 DOCUMENT CHANGE STATUS REV CHANGE DESCRIPTION PREPARED APPROVED A First Release GYVER LO W.C.WANG Contents 1 ABSTRACT 4 2 REFERENCES 5 3 PROBLEM STATEMENT 6 4 TEAM STRUCTURE AND MEMBER LIST 7 5 ESD PROTECTION EQUIPMENT 9 6 MEASURING EQUIPMENT 14 7 ESD CONTROL CHECKING ITEMS 16 8 ESD CONTROL TRAINING PROGRAM 21 9 AUDITING PROGRAM 23 1 ABSTRACT This ESD Control Program establishes the minimum requirements for Electrostatic Discharge (ESD) control methods and materials used to protect electronic devices that are susceptible to damage or degradation from ESD. The passage of a static charge through an electrostatic- discharge-sensitive (ESDS) device can result in catastrophic failure or performance degradation of the part. In the following sections, we implement several ESD protective equipment and some measuring equipment to maintain their functions. Also we implement ESD control training program and ESD audit program to strengthen and check our execution of ESD Control Program. However, the effectiveness should be relied on exact implementation and prompt corrective actions. 2 REFERENCES 2.1 Workmanship Specification for ESD Control Document, A-5951-1589-1, Revision H, ESD Program, HP Corporate, 1999. 2.2 Requirements for Handling Electrostatic-Discharge-Sensitive (ESDS) Devices, EIA-