ABS规范摘选(ACCOMMODATION)..doc

Sleeping Room 36 + The top berth in a tier has a dust-proof bottom of wood, canvas or other suitable material. ILO 92 37 + Mattresses are innerspring construction. The finished thickness is 180 ± 13 mm (7 ±0.5 in). 40 + Each sleeping room is provided with the following furniture (in addition to berths and clothes lockers): a table and chair ILO 92 a mirror with a light ILO 92 a small cabinet for toilet requisites for each person in the room ILO 92 a book rack ILO 92 coat hooks. ILO 92 41 Each sleeping room is provided with storage for: life jackets IMO MODU exposure suits, where applicable. ABS 42 + Furniture is of smooth, hard material, not liable to warp or corrode. ILO 92 43 Each worker’s room is provided with a: television antenna outlet M radio antenna outlet. M 46 Headroom in all sleeping rooms is at least 2050 mm (80 in). Aisles 47 Aisle widths in sleeping areas are: at least 610 mm (24 in), between a single berth and the nearest obstruction T at least 915 mm (36 in), between facing berths S,R at least 1065 mm (42 in), when joining two or more aisles. T Berths 48 + The lower berth in a tier is at least 300 mm (12 in) above the deck. ILO 92 49 + The upper berth is placed approximately midway between the bottom of the lower berth and the lower side of the deck head beams. ILO 92 50 Head clearance above each berth is at least 810 mm (32 in). AN 51 Berth inside dimensions are at least 2020 mm (80 in) by 965 mm (38 in). AB 52 + The framework and lee-board of a berth is of approved material, hard, smooth and not likely to corrode or to harbor vermin. ILO 92 53 + Berths constructed from tubular frames are completely sealed and without perforations which would give access to vermin. Storage Space 54 + Sleeping rooms provide storage space for each occupant: the clothes locker is fitted with a shelf and hasp ILO 92 drawer space is at least 0.056 m3 (2 ft3) for each occupant ILO 92 drawers and doors are arranged to prevent inadvertent ope