CATIA中创建参照图..doc

Tutorials  Setting up blueprints in Dassault CATIA (V5R15)1. After downloading your blueprints, youll have to cut each view individually from the original document with a picture/photo editing software, and save them as separate pictures (front view, right view, top view, etc). Though its not mandatory to have exact dimensions on all saved pictures (however all view have to be on same dimensions), make sure that all views are well-centred on their own documents. To cut, you can use a photo editing software featuring a selection tool, e.g. MSPaint or The Gimp (free).2. Once done, open CATIA. Then, go on the top left corner, and click on the menu Start/Démarrer, then select Shape/Forme (third line), and finally click on Sketch Tracer. This will open a new Assembly Design document called Product1.3. Make sure you are in Realistic Display Render View/Affichage en mode rendu réaliste avec texture.4. In the Design Tree on the left, click on the first top line (by default : Product1).Then, select the Insert/Insertion menu and click on Insert Part/Insérer Pièce. This will create a new Part line, under the Product1 line, and make appears 3 planes and a Origin.5. Now its time to import your blueprints : select (click on) the plane on which you want to import one of the blueprints, and click on Normal View/Vue Normale; this will make your view perpendicular to the selected plane.6. In the right toolbar, click on the icon Create a new immersive sketch/Créer une nouvelle esquisse immersive.7. Select your picture in the window. Then, choose Apply cylindrical view/Appliquer une vue cylindrique and Use a cube/Utiliser un cube. Then click OK.8. Your picture is now imported. Use rotate green commands (see below) to make origins axis match with pictures axis. Use the small filled green marked Zoom (not Size/Taille!) to adjust size of a blueprint in relation to another blueprint. For the command to be effective, you must have at least 2 picture import