Transportandstorageofmaterials..doc

Transport and storage of materials 6.12.3.1 material transportation 1, all kinds of products mainly use 3 tons, 1.5 tons of truck transportation to the site. 2, to make the product deformation damage, mainly a hob loading forms of transport. 3, factory delivery: (1) the factory project department plans to arrange production and processing, delivery, contact projects department materials phone before delivery, if a site unloading conditions, formulate relevant handling quantity, date of handling, cargo floor and assistance program etc. (2) the transport of goods should be securely fastened. (3) the rugged road should be slow. 4, unloading: (1) to reduce the number of handling, the truck to the site, according to the status of the project site directly into the construction location or into the reservoir. (2) vehicles to the site according to the outbound order, after counting the number of quality products. (3) finished unloading trucks out of the site to return as soon as possible, to ensure that the site of the roads. (4) trucks in and out of the site should be pay attention to safety. 6.12.3.2 materials piled up 1, in the first layer in indoor or contractor to provide temporary facilities construction set materials hardware warehouse (mainly put aluminum door and window, profiles, accessories, glass, plastic materials, such as, build a station). 2, after the goods to the site, in order to reduce loss of handling the material shipped to the installation place, as far as possible on the day of the materials are installed on the same day, keep the site clean. 3, piled up must have channel, dont cause secondary handling. 4, considering the installation sequence and decided to storage location. 5, aluminum dont directly on the ground, depending on the profile shape, size, size, both ends on sleepers, sleeper distance shall not be greater than 1000 ㎜, in case of profile extrusion deformation profiles neatly stacked and identity. Six separate piles, ir