WastewaterTreatmentPrinciplesandRegulations..doc

Wastewater Treatment Principles and Regulations AEX-768-96 Karen Mancl Sewage is the wastewater released by residences, businesses and industries in a community. It is 99.94 percent water, with only 0.06 percent of the wastewater dissolved and suspended solid material. The cloudiness of sewage is caused by suspended particles which in untreated sewage ranges from 100 to 350 mg/l. A measure of the strength of the wastewater is biochemical oxygen demand, or BOD5. The BOD5 measures the amount of oxygen microorganisms require in five days to break down sewage. Untreated sewage has a BOD5 ranging from 100 mg/l to 300 mg/l. Pathogens or disease-causing organisms are present in sewage. Coliform bacteria are used as an indicator of disease-causing organisms. Sewage also contains nutrients (such as ammonia and phosphorus), minerals, and metals. Ammonia can range from 12 to 50 mg/l and phosphorus can range from 6 to 20 mg/l in untreated sewage. Sewage treatment is a multi-stage process to renovate wastewater before it reenters a body of water, is applied to the land or is reused. The goal is to reduce or remove organic matter, solids, nutrients, disease-causing organisms and other pollutants from wastewater. Each receiving body of water has limits to the amount of pollutants it can receive without degradation. Therefore, each sewage treatment plant must hold a permit listing the allowable levels of BOD5, suspended solids, coliform bacteria and other pollutants. The discharge permits are called NPDES permits which stands for the National Pollutant Discharge Elimination System. Preliminary Treatment Preliminary treatment to screen out, grind up, or separate debris is the first step in wastewater treatment. Sticks, rags, large food particles, sand, gravel, toys, etc., are removed at this stage to protect the pumping and other equipment in the treatment plant. Treatment equipment such as bar screens, comminutors (a large version of a garbage disposal), and grit chambers are us