高速数控冲床送料工作台及数控系统设计讲述.docx

高速数控冲床送料工作台及数控系统设计摘要本文在对转塔式数控冲床进行深入研究的基础上，提出了数控冲床的总体方案，包括进给系统机械机构传动原理和数控系统的方案。重点进行了进给系统的设计计算，运用SOLIDWORKS三维软件对冲床送料工作台进行设计，并研究了所选专用数控系统的各模块和硬件接线。在分析与研究数控冲床的基础上，介绍了数控冲床的数控系统和进给系统、主传动系统的发展现状及发展趋势，提出了本文的研究目的、意义及主要工作内容。首先根据进给系统机构传动原理，对进给系统进行了设计计算，给出了滚珠丝杠副的尺寸规格，选择了进给系统的电机型号和滚珠丝杠副支撑轴承的型号。运用SOLIDWORKS软件对数控冲床工作台进行设计。再分析数控冲床系统硬件和软件功能的基础上，提出了采用工控机作为数控冲床数控系统的主控制器，采用FAUNC OIP专用数控系统的方案。并对其各模块和硬件接线进行了学习。最后，对本设计所研究的内容进行了总结，提出了设计的不足。关键词：数控冲床，送料工作台，数控系统ABSTRACTIn this thesis, with in-depth study of Multi-turret punch press,the author proposes an overall scheme for Multi-turret punch press, including CNC system and transmission principle of the feeding system .Focus on the design and calculation of feed system, using the SOLIDWORKS 3 D software to design of punch feeding workbench, and studied the selected module of CNC system and hardware connection.Based on the analysis and research of Multi-turret punch press, the paper introduces development status and the future of the CNC system , the main drive system and the feeding system,then proposes the research’s significance ,purpose and main content of the thesis.Firstly, based on transmission principle of the feeding system ,we design the feeding system, and get parameters of the ball screw ,and choose the motor and bearing of the ball screw.Based on the analysis of the hardware and software and software functions of CNC system,we propose Industrial Control Computer for the controller of CNC system,Using FAUNC OIP scheme of CNC system, and to study its various modules and hardware connection.We use SOLIDWORKS software to design workbench of Multi-turret punch press.Finally,we summary the contents of the article ,and get the lack of the paper.Key words: CNC punch press, feeding workbench, numerical control system目录摘要I第一章绪论11.1 数控冲床的组成及其工作过程11.2 数控系统的发展现状21.3 数控冲床数控系统的发展趋势31.4 主传动系统的发展现状及发展趋势3 1.5 课题研究的相关背景41.6论文主要工作5第二章数控冲床总体方案的设计5 2.1 进给系统机构传动原理6 2.3数控冲床数控系统总体分析72.3.1数控系统硬件功能分析82.3.2数控系统软件功能分析102.4数控系统硬件设计102.4.1主控制器的选择102.4.2系统的硬件