各行业专业英文[精选].doc

L 电子行业工艺术语surface mounted components/surface mounted devices (SMC/SMD) 表面组装元器件surface mount technology (SMT) 表面组装技术surface mounted assembly (SMA) 表面组装组件reflow soldering 再流焊 hot air reflow soldering 热风再流焊IR reflow soldering; infrared reflow soldering 红外再流焊Reflow atmosphere 再流气氛 laser reflow soldering 激光再流焊wave soldering 波峰焊 dual wave soldering 双波峰焊beam reflow soldering 光束再流焊 vapor phase soldering (VPS)气相再流焊assembly density 组装密度terminations 焊端lead foot; lead 引脚fine pitch devices (FPD) 细间距器件solder powder 焊料粉末thixotropy 触变性:流遍体（流变体焊膏）的粘度随着时间、温度、切变力等因素而发生变化的特性。slump踏落no-clean solder paste 免清洗焊膏adhesives 贴装胶curing 固化screen printing 丝网印刷screen printing plate 网版screen printer 丝网印刷机stencil printing漏版印刷metal stencil; stencil (metal mask) 金属漏版snap-off-distance 印刷间隙flexible stencil 柔性金属漏版dispensing滴涂(表面组装时，往印刷版上施加焊膏或粘装胶的工艺工程)stringing 挂珠 teach mode programming 示教式编程drying; prebaking 干燥 off-line programming 脱机编程tape feeder带式供料器stick feeder 杆式供料器placement accuracy 贴装精度rotating deviation 旋转偏差placement direction 贴装方向flying 飞片 skewing 偏移 SPC中英文名词术语索引人械料法环4MIE 80:20原理80:20Principle 准确度Accuracy 成品改善Action on Output 制程中对策Action on the Process 人员变异Appraiser Variation 计数值Attribute Data 平均数Average 中位数平均Average of Median 全距平均Average of Range 　 标准差平均Average of Standard Deviation 平均数－全距管制图Average-Range Control Chart 二项分配Binomial Distribution 平均数－标准差制图Average-Standard Deviation Control Chart 中心线Center Line;CL 中央极限定理Central Limit Theorem 管制界限Control Limits 持续改善Continual Improvement 管制图Control Chart 分散Dispersion 管制计划Control Plan 计件Count by Pieces 计点Count by Points 关键制程特性Critical Process Characteristics 共同原因Common Cause 每百万缺点数管制图Defect Parts Per Million Control Chart 分配Distribution 关键产品特性Critical Product Parameter 仪器变异Equipment Variation 连续随机变数Continuous Random Variable 估计平均数Estimated Average 离散随机变数Discrete Random Variable 单位缺点数Defects Per Unit 单位缺点数管制图Defects Per Unit Contro Chart 指数分配Exponential Distribution 估计不良率Estimated Process Percent D