STSTM32F103xxSTEVAL-CCM001V2图像解决方案.docx

ST STM32F103xx STEVAL-CCM001V2图像解决方案关键字：工业控制,马达驱动,PLC,变频器,HVAC,医疗设备,计算机外设ST公司的STEVAL-CCM001V2图像解决方案是采用STM32F103xC,STM32F103xD或STM32F103xE 32位MCU,采用ARM? Cortex?-M3 RISC内核,工作频率72MHz,具有256-512KB闪存,USB.CAN以及格1个定时器,3个ADC和13个通信接口,工作电压2.0到3.6V,工作温度–40到+105℃,主要用在马达驱动和应用控制,医疗和手持设备,PC外设和GPS平台,工业应用,PLCV,变频器,打印机和扫描仪以及告警系统,视频互连和HVAC.本文介绍了STM32F103xC,STM32F103xD和STM32F103xE主要特性,方框图,时钟树和电源方案,以及STEVAL-CCM001V2图像演示板主要特性和电路图.The STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance ARM? Cortex?-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.The STM32F103xx high-density performance line family operates in the –40 to +105 ℃temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F103xx high-density performance line family offers devices in six different package types: from 64 pins to 144 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.These features make the STM32F103xx high-density performance line microcontroller family suitable for a wide range of applications:● Motor drive and application control● Medical and handheld equipment● PC peripherals gaming and GPS platforms● Industrial applications, PLC, inverters, printers, and scanners● Alarm systems, video intercom, and HVACSTM32F103xx主要特性:■ Core: ARM 32-bit Cortex?-M3 CPU– 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access