ROS软路由超详细的PCC设置步骤,实现一线多拨,五条宽带叠加.docx

PCC实验一、基本配置，使网络能够正常连通1.pppoe拨号：拨通五个帐号PPPOE client的连接状态，已连接设备NAT：5个接口出去都做NAT创建一个bridge，把其他局域网口添加到bridge中。添加其他局域网口到bridge中DHCP 服务器设置（局域网自动获取IP地址）局域网的网段为192.168.10.0/24把192.168.10.254作为内网的网关设置网关的地址，接口添加到bridge1上一般我们用DHCP setup来自动设置DHCP server这种设置比较简单快速路由配置：所有的基本配置都设置好了，局域网可以正常上网了，但是为了实现更好的网络环境，我们需要做更好的策略。这就需要使用PCC了，下面就看看PCC怎么做的吧。二、PCC的配置Mangle标记标记内网地址为192.168.10.0的五条线路的连接标记标记第一条连接：同理：配置剩余的4调链路：5/1,c2; 5/2.c3; 5/3,c4; 5/4,c5.从连接中提取路由标记：从连接里提取路由标记标记第一条连接c1，命令为R1同理：提出其他4调路由命名为R2,R3,R4,R5.标记连接，的命名配置方式为：[admin@MikroTik] /ip firewall mangle print Flags: X - disabled, I - invalid, D - dynamic 0 chain=prerouting action=mark-connection new-connection-mark=c1 passthrough=yes src-address=192.168.10.0/24 dst-address-type=!local per-connection-classifier=both-addresses:5/0 1 chain=prerouting action=mark-connection new-connection-mark=c2 passthrough=yes src-address=192.168.10.0/24 dst-address-type=!local per-connection-classifier=both-addresses:5/1 2 chain=prerouting action=mark-connection new-connection-mark=c3 passthrough=yes src-address=192.168.10.0/24 dst-address-type=!local per-connection-classifier=both-addresses:5/2 3 chain=prerouting action=mark-connection new-connection-mark=c4 passthrough=yes src-address=192.168.10.0/24 dst-address-type=!local per-connection-classifier=both-addresses:5/3 4 chain=prerouting action=mark-connection new-connection-mark=c5 passthrough=yes src-address=192.168.10.0/24 dst-address-type=!local per-connection-classifier=both-addresses:5/4 提取路由的命令 5 chain=prerouting action=mark-routing new-routing-mark=R1 passthrough=yes src-address=192.168.10.0/24 connection-mark=c1 6 chain=prerouting action=mark-routing new-routing-mark=R2 passthrough=yes src-address=192.168.10.0/24 connection-mark=c2 7 chain=prerouting action=mark-routing new-routing-mark=R3 passthrough=yes src-address=192.168.10.0/24 connection-mark=c3 8 chain=prerouting action=mark-routing new-routing-mark=R4 passthrough=yes src-address=192.168.10.0/