杜邦手部防护.pptVIP

4.使用刀或搬运有锋利边的材料时，要戴防切割手套（如Kevlar手套）。好的刀柄可避免手滑到刀刃上引起的伤害。 5. 不用的刀具要放在刀鞘 里或折起来，用后要放好，刀刃要保护好。禁止将刀具藏在破布、纸张下，或和抽屉或工具箱内的其它工具混在一起。 6. 通常，袖珍的刀具不允许当作作工具使用。使用前要先了解工作现场的具体要求。 7. 推荐使用刀刃能自动回缩的刀。 * * Your hands are your most valuable tools. Nothing has ever been invented that can match them for usefulness and adaptability. That’s why it’s so important to learn how to protect your hands, both at work and at home. 手的价值无以伦比。从来没有什么比手更有效更灵活的发明。因此，学会上下班如何保护双手，非常重要。 You rely on your hands constantly. Think for a moment what life would be like without one of your fingers. Not a very pleasant thought is it? In this material you will learn 10 rules for hand safety. The rules are listed below 日常生活中，我们非常依赖双手。想一下，缺了一支手指，生活会变成什么样。想想就不舒服，是吧? 以下列出了手的安全的十条规则 1.Keep hands away from pinch points and crushing hazards. Inspect materials for slivers, jagged edges, burrs, and rough or slippery surfaces. MATERIAL HANDLING 2.Always consider ergonomics of the hands. 3. Use the correct hand tool for the job and use it properly. 4. Always wear suitable gloves unless noted on your Work Procedure. Never wear gloves when working around rotating equipment. 5. Remove all jewelry before performing work. 6. Make sure safety guards are in place before you begin any job. 7. Never reach into machinery to repair, oil, or adjust without taking the proper lockout / tag out steps. 8. Clean up with a rag or brush -never uses your fingers or hands. 9. Know the Danger Zones. 10. Keep your hands clean. Don’t ignore hand injuries. Know the signs of dermatitis and other skin disorders. Get prompt medical attention when required. 1. 不要把手放在可能夹到或压到的地方。处理材料，工具和设备前，一定要先检查一下是否 有毛刺、飞边，材料表面是否粗糙、光滑。 2. 时刻想到手的生理结构 3. 选用合适的手动工具，并正确使用 4. 除非在Work Procedure (工作程序) 中有特别注明, 所有作业都要戴合适的手套。而旋转设备周围作业时则禁止戴手套 5. 作业前摘掉所有可能影响安全的首饰 6. 开始作业前确认机器是否有安全防护装置 7. 没有上锁/ 挂标签之前，禁止进行机器的修理、上油或调试 8. 用抹布或刷子擦拭，不要用手指或手。 9. 了解危险区域 10. 保持手的清洁，不要忽视任何可能的伤害。了解皮炎的症状或其它皮肤病 ，必要时立即就医。 Keep hands away from pinch points and cru