G40非核级阀门试验规程.doc

Q/SJV 慎江阀门 HG/SC.3G40-2013-SNG A版 A Revision 受控 Under control 核电阀门 非核级阀门试验规程 Hydrostatic Test Specification of Non-safety Valves 慎江阀门有限公司 发布 Released By Shenjiang Valve CO., ltd 前 言 FOREWORD 本规程由慎江阀门有限公司提出 This specification is proposed by Shenjiang Valve Co., Ltd. 本规程由慎江阀门有限公司技术部负责起草 This specification is drafted by the technology Dept of Shenjiang Valve Co., Ltd. 本规程主要起草人：孟庆联 2013.8.10 Main drafter: 本规程审核人： 董 杰 2013.8.10 Reviewed by: 本规程批准人： 殷连波 2013.8.10 Approved by： RECORD OF REVISIONS 版本号 Revision 修改内容 Changes 修改人 Author 审核人 Verified By A 初版 Original Issue Q/SJV 慎江阀门 核电阀门 非核级阀门试验规程 Hydrostatic Test Specification of Non-safety Valves HG/SC.3G40-2013-SNG A版 A Revision 共7页 第1页 Page 1 of 7 1 主题内容与适用范围The content and application scope 本规程规定了按CAP1400规范设计的PV33、PV40、PV41等非核级阀门压力试验（如壳体水压试验，填料、阀座密封试验等）的要求。 本规程适用于按CAP1400规范设计的非核级闸阀、球阀、旋塞阀、蝶阀、止回阀、截止阀等，其他类型的阀门也可参照使用。 This specification identifies the hydraulic shell test, packing seal, valve seat seal tests etc. requirements for CAP1400 design non- safety related PV33、PV40、PV41 valves. This specification is applicable to the CAP1400 design non- safety related gate valve, ball valve, plug valve, butterfly valve, check valve, globe valve and so on; other types of valves can also reference this specification. 2 引用标准及规范Reference standards and norms SNG-PV33-Z0-001 大于等于3”的手动闸阀、截止阀、止回阀，ASME B16.34 3” and larger manually operated gate，globe and check valves，ASME B16.34 SNG -PV40-Z0-001 球阀和旋塞阀，ASME B16.34 Ball and plug Valves, ASME B16.34 SNG -PV41-Z0-001 蝶阀，ASME B16.34 Butterfly Valves, ASME B16.34 ASME B16.34-1981 法兰、螺纹和焊接连接阀门 Flanged, threaded and welded connection valve ASME BPVC-Ⅲ-2001 核动力装置设备建造准则 Rules for the construction of nuclear facility components MSS SP-61-1985 钢制阀门压力测试 Pressure test of steel valves MSS SP-68-1997 高压偏心结构蝶阀 High-pressure eccentri