电气安装质量控制文件.doc

1 施工方案和技术资料审核 Review of Work Method Statement and Technical Documents (1)施工方案 Contraction procedures (2) 质量控制程序 Quality control system (3)电工资质 electrician Qualification 施工方案审查程序 Review and Approval Procedure for Construction Method statement GB50319-2000A2 I QR WR WR - 2 设备材料验收 Equipment and Materials Inspection (1) 设备外观检查符合规范要求；检查内容包括品种，型号，数量，铭牌，规格，质量设备材料合格证Visual inspection to equipment/material as per code requirement, check the type, quality, specification, and certificates. (2)专用工具，技术文件齐全Special tools and technical document are complete 材料汇总表执行《设备进场检验程序》 As per material take-off and Inspection Procedure for Material and Equipment delivered on Site GB50319-2000-A9 MAR IT QR WR WR W 3 盘柜基础验收 Panel Foundation Acceptance Inspection 基础位置，预留恐，预埋件 Foundation, location, pre-installed opening and embedded items. (2) 基础型钢平直度 Levelness of steel base 执行 GB50171-1992 《电气装置安装工程盘柜及二次回路结线施工及验收规范》 和《专业间移交程序》 As per GB50171-1992, Code on Construction and Acceptance Inspection of Panel Installation and Control Circuit wiring of Electrical Work. Turnover Procedure among disciplines. GB50319-2000-A4/A10 I W W - 4 盘柜安装检查 Panel Installation Acceptance (1)水平度，垂直度，间隙，位号 Verticality, levelness, clearance and tag number (2)电器安装，抽屉小车操作灵活，接触可靠 执行 GB50171-1992 《电气装置安装工程盘柜及二次回路结线施工及验收规范》，《安装过程质量控制程序》 和安装平面图 As per GB50171-1992, Code on GB50319-2000-A4/A10. I W W - Electric devices installation, busbar, phase sequence and marking (3)?绝缘测试和接地测试 Insulation Megger test and grounding continuity test. Inspection of Panel Installation and Control Circuit Wiring of Electrical Work. P-CM306001 Quality Control Procedure in the Process of Installation. Construction Drawings. 5 保护控制盘安装 Installation of control panels. 水平度，垂直度，间隙，位号 Verticality, levelness, clearance and tag number 电器安装，小母线，相序，标志牌 Electric devices installation, busbar, phase sequence and marking ?绝缘电阻及接地试验 Insulation Megger test and grounding continuity test. 执行 GB50171-1992 《电气装置安装工程盘柜及二次回路结线施工及验收规范》，《安装过程质量