工程设计常用标准规范目录例析.doc

国家标准 序号 标准编号 标 准 名 称 GB/T41-2000 1型六角螺母 C级Hexagon nuts--Product grade C GB/T62.1- 2004 蝶形螺母圆翼Wing nuts--Round wing GB/T62.2- 2004 蝶形螺母方翼Wing nuts--Square wing GB/T62.3- 2004 蝶形螺母冲压Wing nuts--Pressing wing GB/T62.4- 2004 蝶形螺母压铸Wing nuts--Die-casting wing GB/T63-1988 环形螺母Lifting nuts GB/T 67-2008 开槽盘头螺钉Slotted pan head screws - Product grade A GB/T71-1985 开槽锥端紧定螺钉Slotted set screws with cone point GB/T73-1985 开槽平端紧定螺钉Slotted set screws with flat point GB/T 79-2007 内六角圆柱端紧定螺钉Hexagon socket set screws with dog point GB/T 80-2007 内六角凹端紧定螺钉hexagon socket set screws with cup point GB/T91-2000 开口销Split pins GB/T93-1987 标准型弹簧垫圈Single coil spring lock washers--Normal type GB/T95-2002 平垫圈 C级Plain washers--Product grade C GB/T 96.1-2002 大垫圈 A级Large series--Product grade A GB/T 96.2-2002 大垫圈 C级Large series--Product grade C GB/T97.1-2002 平垫圈 A级Plain washers--Product grade A GB/T 97.2-2002 平垫圈倒角型A级Plain washers，chamfered--Product grade A GB/T 97.3-2000 销轴用平垫圈Plain washers for clevis pins GB/T 97.4-2002 平垫圈用于螺钉和垫圈组合件Plain washers for screw and washer assemblies GB/T 97.5-2002 平垫圈用于自攻螺钉和垫圈组合件Plain washers for tapping sew and washer assemblies GB/T117-2000 圆锥销Taper pins GB/T119.1-2000 圆柱销不淬硬钢和奥氏体不锈钢Parallel pins，of unhardened steel and austenitic stainless steel GB/T119.2-2000 圆柱销淬硬钢和马氏体不锈钢Parallel pins，of hardened steel and martensitic stainless steel(Dowel pins) GB/T175-2007 通用硅酸盐水泥Common Portland Cement GB201-2000 铝酸盐水泥Aluminate cements GB/T342-1997 冷拉圆钢丝、方钢丝、六角钢丝尺寸、外形、重量及允许偏差Dimension，shape，mass and tolerance for cold-drawn round，square and hexagonal steel wires GB/T539-2008 耐油石棉橡胶板Oil-resisting compressed asbestos fibre jointing GB699-1999 优质碳素结构钢Quality carbon structural steels GB/T700-2006 碳素结构钢Carbon structural steels GB/T702-2008 热轧钢棒尺寸、外形、重量及允许偏差Hot-rolled steel bars - Dimensions，shape，weight and tolerances GB/T706-2008 热轧型钢Hot rolled section steel GB/T 708-2006 冷轧钢板和钢带的尺寸、外形、重量及允许偏差Dimension,sha