OVERVIEWOFCONSTRUCTIONANDDESIGNOFAUGERCAST-IN-PLACE.pdfVIP

OVERVIEW OF CONSTRUCTION AND DESIGN OF AUGER CAST-IN-PLACE AND DRILLED DISPLACEMENT PILES Monica Prezzi, Assistant Professor, and Prasenjit Basu, Doctoral Student, Purdue University, USA Auger cast-in-place (ACIP) piles and drilled displacement piles are being increasingly used as foundation elements for structures, particularly in projects requiring accelerated construction or involving the rehabilitation of foundations of existing, overstressed structures. Auger cast-in-place piles (also referred to as continuous-flight-auger piles) are widely used to construct the foundations of all types of structures. There are many different types of drilled displacement piles, with the installation methods varying according to the equipment used. Depending on the specific rotary piling technology used, responses ranging from those associated with non-displacement to those associated with full-displacement piles are obtained. Conventional pile design methods do not account for how the various construction techniques involved in auger piling change the soil state around the pile during installation and, hence, cannot accurately estimate the pile resistance in a consistent way. Research on this subject, identifying the different variables that must be accounted for in design and linking these variables to installation methods, is lacking. This paper describes the different piling methods available for auger cast-in-place and drilled displacement piles, the equipment used to install them and the quality control processes typically used. It also reviews some of the design