mFixesLEDLightSets.pdfVIP

Photo: FPO Fixes LED Light Sets Repara series de luces LED LED Keeper? includes: ? LED Bulb Tester ? Fuse Tester ? Bulb Puller LED Keeper? incluye: ? Probador de focos LED ? Probador de fusibles ? Extractor de focos 9 V Battery Included (1) Batería de 9V incluida (1) The Only Kit Able to Diagnose and Repair LED Light Sets El único kit que puede diagnosticar y reparar series de luces LED LED Keeper B LEDK The three most important rules when working with electricity: safety, safety, safety. How Does It Work? The LED Keeper? uses insulation piercing to connect to the copper within the light set wires and illuminate functioning sections by creating mini-circuits. Success will be achieved through the process of elimination. When pulling the trigger, the bright red illuminated LED indicates a functional battery. Exhausted batteries are to be removed from the product; Non-rechargeable batteries are not to be recharged. When disposing of batteries, Do Not Dispose of Batteries in Fire. Batteries May Explode or Leak. 1 Locating the Problem Step 1A: Plug the light set into an AC outlet. If entire string is unlit, go to Step 1B. If set is partially lit, use place markers provided to identify the faulty section. Place the markers at first and last unlit bulb. Step 1B: Unplug the set from the AC outlet and plug the failed LED light set directly into the LED Keeper? cord. Step 1C: Start about halfway between the place markers. At that point, select a wire that attaches to a bulb socket and place it into the black hook at the front of the LED Keeper? (Fig. A). No harm will occur by piercing the wrong wire, however, no success will be achieved either. The LED Keeper? is not intended for Incandescent light sets. Step 1D: Pull and hold the trigger. The LEDs on one side of the piercing should illuminate. If not, re-hook and try again. If still no illumination, choose another location between the place markers, re-hook, and pull trigger. The problem bulb/socket is located in the non-ill