VRB2LEDRoundBollard-KimLighting.pdfVIP

Type: Job: Catalog number: VRB2 LED Round Bollard Dual Function, Vandal-Resistant, Aluminum Shaft revision 8/7/14 ? kl_vrb2led_spec.pdf Approvals: VRB2 / Fixture Electrical Module / / Luminaire Finish (includes top cap and shaft) Option See page 2 Date: Page: 1 of 3 Specifications VRB-LED Models 10 - 20 Diodes VRB2 - Dual Function Luminaire (Aluminum Shaft) Maximum weight: 30 lb 8 DIA. (203 mm) 6 (152 mm) 9 (229 mm) 36 LIGHT CENTER HEIGHT (914 mm) 42* (1067 mm) *30 OR 36 OVERALL HEIGHT AVAILABLE - CONTACT KIM REPRESENTATIVE BASE PLAN VRB ALUMINUM SHAFT 8 DIA. (203 mm) 1K ANCHOR BOLT PROJECTION (38 mm) 3L CONDUIT OPENING (95.3 mm) 5 BOLT CIRCLE DIA. (127 mm) VRB1 and VRB3 VRB2 and VRB4 Domed Top Cap: Die-cast aluminum secured to louvers by concealed allen screws in keyhole slots. For relamping access, allen screws shall not require complete removal. Louvers: One-piece sand-cast with horizontal and vertical blades. Horizontal louvers shall provide 210° of downlighting with source cutoff above horizontal. Vertical louvers shall provide 150° of non-cutoff lighting. Horizontal louver blades shall have a 1L depth with a 65° upward pitch from horizontal. Vertical louver blades shall have a 1L depth with a 30° spacing. Louver assembly shall be secured to shaft by four internal tie rods. Lamp Enclosure: One-piece tempered molded glass with internal flutes and full gasketing at bottom edge. Socket: Porcelain medium base socket rated 4KV for HID and incandescent. Plastic socket for Fluorescent. Fixture Head: Allows flow-through ventilation around and above the lamp enclosure. Shaft: One-piece extruded aluminum, .125 wall thickness with heavy cast aluminum twist-lock anchor base concealed within the shaft. Concealed set screws shall lock shaft onto the cast anchor base. Electronic Module: All electrical components are either UL or ETL recognized, mounted on a single plate and factory prewired with quick disconnect plugs. Driver is rated for -40°F starting and has a 0-10V