菲林制作手把手的教程.pptVIP

菲林制作教程 2012-8-20 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 先确定客户是否把打样需要用到的图纸给全 1.效果图 2.结构图 如图纸完全后，就可以开始制作菲林 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 1.先看客户图纸，需要知道客户需要的是镜片效果，确定制作方案 这个镜片可以用我们最常见的丝印黑色，镜面银，黑色的工艺来完成 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 2.在确定了客户所需要的效果过后看结构，可以知道需要给出产品多大间距 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 3.画对位线，主镜片的对位线10*10mm Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 4.Alt+F8可以调出来偏移工具，偏移需要用到 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 5. 镜片厚度为0.8MM,我们可以给产品间距为2.0mm，镜片是41.08*53.05mm，对位线就按43.08*55.05mm偏移，得到如右图所示的框架图 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 6.导入定位孔，更改定位孔上面需要用到的信息 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 7.需要分别群组放定位孔一方的一排对位线和定位孔，选中群组好的对位线不松手，按住Shift选群组好的定位孔，手放开，点BCE,中心对称字位孔与对位线 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 8.选定位孔往下偏移5mm Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 9.调整镜片尺寸同2D图，用中心对称定位孔和对位线的方式使镜片中心对称到四个对位线中间 镜片尺寸需要和客户结构图一比一，LOGO字符要和客户效果图一致 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 10.为检测镜片图纸里面有没有其它的线条可以把图纸全部转成线框模式 转成线框模式后，我们可以看到构成镜片的所有线条，左图镜片图纸里面有一个椭圆的形状，为不影响后续操作，我们可以把它删掉 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 11.检查完图纸线条过后就可以填充黑色或者白色来制