GE防盗报警统系安装手册.pptVIP

* The NX-507 and the NX-508 are essentially the same board, with the exception of the NX-507 having NO PRINTER PORT and having 7 form C (SPDT) relays and one open collector output instead of having 8 open collector outputs. From a connection and programming standpoint, it is the same. You can use up to 8 of either the NX-507 or NX-508 boards in any combination on an NX-8. The NX-6 and NX-4 are subject to their respective maximum module limitations. * Numerical data is programmed by entering a number from 0 to 255 on the numeric keys of the keypad. To view the data in a location, a binary process is used. For instance, I can enter the numeric data “66” by simply pressing 6 6 * on the keypad. When I view this data however, the zone 2 LED and the zone 7 LED will be illuminated. In this example, the zone 7 LED would signify 64, and the zone 2 LED would signify 2. Summing those would give me 66. * Programming feature data is even simpler than programming numeric data. Simply enter the location you wish to program (shown here as location 23) and select the features you wish to have. Here we have chosen Quick Arming, Audible Keypad Panic, and Keypad Auxiliary 1. Once all of the choices you wish to make are illuminated or displayed on the LCD, press * to advance to the next segment. Make sure to press all of the choices you wish to make before pressing the *. 主讲：杨老师 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 安全防范报警系统控制主机是组成报警系统的基本控制设备。它的作用是 ：对系统进行编程、对防区进行布防和撤防、对前端探测器进行供电、对 接收到的前端探测器的报警信号进行处理，响应或不响应报警。响应报警 时，发出报警信号，驱动辅助设备进行警情处理，如驱动警灯、警号发出 警报，驱动打印机打印警情报告，驱动联动设备执行报警操作，通过电话 线/网络向上一级报警中心发出警情报告等。 报警主机 报警接收机 报警中心 前端探测器 局域网/广域网 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 特性： ·所有的防区可编程为火警和盗警 ·最多可接24个键盘 ·通过遥控编程可上传/下载主机编程 ·插入式模块设计，充分利用机箱空间 ·4个内置可编程输出口(47 种驱动事件可选) ·每个子系统最多可接8个键盘（最多24个） ·可分配防区到一个或多个子系统 ·99个4位用户密码或66个6位用户密码 ·内置