注塑料—均聚料.pdfVIP

注塑料—均聚料 Injection Molding Grade-Homopolyer 产品简介 产品包装及贮运要求 中国石化均聚聚丙烯具有较高结晶度、高刚性、高强度、高 产品采用聚丙烯内涂膜编织袋、FFS薄膜袋包装，净重25 模量，良好的耐热变形性，良好的耐划痕性和良好的流动 Kg /袋。 性。还具有制品成型周期短的优点。 产品应存放在通风、干燥的仓库内，远离火源，防止阳光直 Overview 接照射，不得露天堆放。产品运输时不得在阳光下曝晒或雨 淋，不得与沙土、碎金属、煤炭、玻璃等混合装运，更不可 Sinopec PP homopolymer has higher crystallinity, high rigidity, high tensile strength, high modulus and good thermal distortion 与有毒物质、腐蚀性和易燃物品混装。 resistance. Products made from this resin are characterized by Packages, Storage and Transportation short processing time, good scratching resistance and ?uidity. The resin is packaged in internally film-coated polypropy lene woven bags or FFS film bags. The net weight is 25Kg/bag. 产品用途 The resin should be stored in a drafty, dry warehouse and away 均聚聚丙烯可广泛用于电水壶、电饭锅、电熨斗、取暖器、 from fire and direct sunlight. It should not be piled up in the open 电吹风、电烤面包器、电热干手器等小家电的生产。 air. During transportation, the material should not be exposed to strong sunlight or rain and should not be transported together with Applications sand, soil, scrap metal, coal or glass. Transportation together with PP homopolymer is widely used in the production of small electrical toxic, corrosi