难难削材加工用工具削材加工用工具.pdfVIP

难削材加工用工具 Cutting tools for Dif?cult-to-cut material 实现了难削材的稳定、长寿命加工 For stable cutting and long tool life of dif?cult-to-cut material 耐热合金用 For Heat Resistant Alloy PR13系列 PR13 series (PR1305/PR1310/PR1325) 用途　镍基耐热合金、铁基耐热合金 　　　钴基耐热合金、析出硬化系不锈钢 Application Nickel base heat resistant alloy, Iron base heat resistant alloy Cobalt base heat resistant alloy, Precipitation hardening stainless steels .($05 钛合金用 For Titanium alloy SW系列 SW series (SW05/SW10/SW25) ??κ?????倄??? 耐热合金用 For Heat Resistant Alloy PR1305/1310/1325 ■MEGACOAT实现长寿命(PR13系列) Long tool life by MEGACOAT technology 卓越的耐磨耗性、耐热性 Excellent wear resistance and heat resistance .($05 硬度(GPa) Hardness MEGACOAT 高硬度、卓越的抗氧化性 平滑的表面 High hardness and oxidation resistance, smooth surface MEGACOAT TiAlN 特殊硬质合金母材 Special carbide substrate TiN 氧化开始温度(℃) Oxidation temperature(°C) ■特殊硬质合金母材 Special carbide substrate 抗崩损、稳定加工 Fracture resistance, Stabilization 均一粒子使耐热冲击性良好、高硬 度持续性 高硬度、高耐热性的MEGACOAT,实现高速、稳 定加工以及刀片的长寿命化。 MEGACOAT, with high hardness and oxidation resistance, realizes stable machining at high speed and long tool life. 高 High 材质 Insert Grades 用途 Application PR1305 连续、精加工用材质 Continuous / Finishing PR1310 第一推荐材质 First recommendation PR1325 断续、粗加工用材质 Interrupted / Roughing PR1305 切 削 速 度 PR1310 Vc PR1325 低 Low Low Fracture resistance High (Toughness) 精加工 Finish 半精加工 Semi-finish 粗加工 Roughing 连续 轻连续 断续Continuous Light Interrupted Interrupted ■新刀尖形成FET※技术(PR13系列、SW系列共通) ※FET：良好刀尖处理 New edge preparation (PR13 series, SW series) ※FET：Fine Edge Treatment 低阻力抗振刀 Low cutting force reduces chattering 大前角以及小微调R珩磨，控制 毛刺及境界磨损。工件的加工 面良好。 Large rake angle and small radius honing controls prevents burr and notching and improves ?nished surface. FET技术使刀尖可调控 Cutting edge condition by FETtechnology ■PR13系列性能评价 Cutting Performance Evaluation of PR13 series 卓越的耐磨耗性 Excellent wear resistance ·耐磨耗性比较(镍铬合金718) In-house cutting test(Inconel718) 公司内评价 Internal evaluation 切削条件 Condition:Vc=45m/min, ap=0.25mm, f=0.15mm/rev., wet, 外圆连续 Continuou