[精品]atv31_traverse_control_en_v1.pdf

Programming manual Traverse control Altivar 31pppT Variable speed drives for asynchronous motors Traverse control 1Table of contents Warnings____________________________________________________________________________________________________ 2 Using the traverse control programming manual _____________________________________________________________________ 3 Factory configuration __________________________________________________________________________________________ 4 Function compatibility __________________________________________________________________________________________ 5 List of functions which can be assigned to inputs/outputs ______________________________________________________________ 6 Settings menu SEt- and motor control menu drC- ____________________________________________________________________ 7 I/O menu I-O- ________________________________________________________________________________________________ 8 Control menu CtL- ____________________________________________________________________________________________ 9 Application functions menu FUn- ________________________________________________________________________________ 11 Display menu SUP- __________________________________________________________________________________________ 22 Configuration/Settings table ____________________________________________________________________________________ 23 Communication variables ______________________________________________________________________________________ 24 NOTE: Please also refer to the Installation Manual and the Altivar 31 Programming Manual. Warnings When the drive is powered up, the power components and some of the control components are connected to the line supply. It is extremely dangerous to touch them. The drive cover must be kept closed. In general, the drive power supply must be disconnected before any operation on either the electrical or mechanical parts of the installation or machine. After the ALTIVAR has been