LMETLB[].pptVIP

* Product Specification LM170E01 Liquid Crystal Display Ver 0.1 Feb. 14, 2005 SPECIFICATION FOR APPROVAL (◆) Preliminary Specification ( ) Final Specification *When you obtain standard approval, please use the above model name without suffix SIGNATURE DATE / Please return 1 copy for your confirmation with your signature and comments. Product Engineering Dept. LG. Philips LCD Co., Ltd APPROVED BY DATE REVIEWED BY PREPARED BY D.G.Kim / Engineer Title 17.0” SXGA TFT LCD BUYER MODEL SUPPLIER LG.Philips LCD Co., Ltd. *MODEL LM170E01 SUFFIX TLB3 / / Y.W.Lee / Manager G.T. Kim / Manager General CONTENTS NO. ITEM COVER 1 - CONTENTS 2 - RECORD OF REVISIONS 3 1 GENERAL DESCRIPTION 4 2 ABSOLUTE MAXIMUM RATINGS 5 3 ELECTRICAL SPECIFICATIONS 6 3-1 ELECTRICAL CHARACTERISTICS 6 3-2 INTERFACE CONNECTIONS 8 3-3 SIGNAL TIMING SPECIFICATIONS 12 3-4 SIGNAL TIMING WAVEFORMS 13 3-5 COLOR INPUT DATA REFERANCE 14 3-6 POWER SEQUENCE 15 4 OPTICAL SPECIFICATIONS 17 5 MECHANICAL CHARACTERISTICS 21 6 RELIABILITY 24 7 INTERNATIONAL STANDARDS 25 7-1 SAFETY 25 7-2 EMC 25 8 PACKING 26 8-1 DESIGNATION OF LOT MARK 26 8-2 PACKING FORM 26 9 PRECAUTIONS 27 3-7 VCC POWER DIP CONDITION 16 RECORD OF REVISIONS Revision No Description Date Page Ver 0.1 Preliminary Specifications Feb. 14, 2005 1. General Description The LM170E01-TLB3 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type display operating in the normally white mode. This TFT-LCD has a 17.0 inch diagonal measured active display area with SXGA resolution(1024 vertical by 1280 horizontal pixel array) Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit g