栗村电磁屏蔽膜说明书(EMIshieldfilmstorage_handling)讲述.pptx

YOULCHON EMI Shield Film Storage Handling [ YES-A20 ] YOULCHON CHEMICAL RD Center Industry Materials RD Team 2016. 03. 10 Confidential EMI shield film Structure Protection Film Conductive Adhesive Layer Insulation Layer Carrier Film 2 layer structure Insulation + Conductive Adhesive Structure Material / feature Thickness Carrier Film Release Matt PET Film 50±5? Insulation layer Modified Resin based 20±4? (After Press) Conductive adhesive layer Modified Resin based (with metal filler) Protection Film Release PET Film 75±7? Data is measured in the above, not guaranteed values. Warranty : 3 months Test method - Conductivity : condition : Quick press (180℃, 120bar, 100sec) Baking(160℃, 3600s) - Solder Resistance (288℃, 10sec) - Peel strength (Cross Cut) ?Storage Warning Shelf Life - Store it in low temperature humidity (temp.: 5±3℃/ humidity: 40±10%) away from direct sunshine. Retention period Storage Temperature 5℃ 25℃ 40℃ 0day O O O 1day O O O 2day O O O 3day O O O 4day O O △ 7day O △ X 10day O △ X 14day O X X 1month 2month 3month 4month 5month 6month EMI shield film Storage Handling [ Product stability with the storage conditions ] Test 中 Solder Bath Bubble Delami check! EMI shield film Storage Handling [ Time to turn room temperature in the storage temperature ] Time for a stored film gets a room temperature, 25℃ Storage Temperature Time 0℃ 6 hr 5℃ 5 hr 10℃ 4 hr Allow the refrigerated film with plastic wrap to stand at room temperature before using it. By doing this, you can avoid deterioration from Dew condensation. ?Storage Warning Shelf Life Please restore the EMI shield film back to room temperature for 6hours more with wrapping. Preparation Remove release film Pre-fix Hot press Remove protective film How to use for FPCB [ EMI shield film ] [ FPCB ] Iron Soldering iron Pre-fixing [ Recommended Pre-Fix Condition ] Release protection film from conductive layer. ?The conditions may vary depending on the conditions of the worki