Jun.30th,2014.PDFVIP

No.2, Technology Rd. V, Hsinchu Science Park, Hsinchu, Taiwan, R.O.C. Tel: 886-3-5780333 Fax: 886-3-5783000 Web: Jun. 30th, 2014 Declaration of RoHS (including PFOS REACH ) Compliance Dear Customer, ISSI hereby declares that all our lead free products satisfy the following requirements/conditions: 1) Using an ‘’L’’ , “G” or after the package type designating letter in the IS prefix or IC prefix part number for identification respectively. 2) Complying with the RoHS (EU Directive entitled “Restriction on the use of certain Hazardous Substances 2011/65/EU, and 2006/122/EC”) requirements and containing none of the following 7 substances: Pb, Hg, Cd, Cr(VI), PBB, PBDE, and PFOS. 3) Complying with the IPC/JEDEC J-STD-020 with regard to the solder profile requirement (Max. reflow temperature 260 deg.C ) 4) Complying with the 155 SVHC (Substance of Very High concern) of EU directive of the Regulation (EC) No 1907/2006 (REACH): the part shall not contain more than the 0.1% of the following SVHC by weight of part as defined in appendix also including annex XVII. ECHA Candidate list table : http://echa.europa.eu/web/guest/candidate-list-table 5) Complying with IEC 61249-2-21, JPCA-ES01 2003 IPC 4101, the Br, Cl , must be lower than 900 ppm, respectively, and total amount of PPM must be lower than 1500 ppm (Br + Cl 1500 ppm ). 6) Not use the materials from mines with inferior working conditions, such as DRC (Democratic Republic of the Congo). The suppliers or subcontractors will be trace the supply chain for gold (Au), tantalum (Ta), tungsten (W), tin (Sn) and cobalt (Co). This Declaration is made with ISSI’s best commercial effort to verify the compliance, of its suppliers, with the above requirement, and is given in good faith without any responsibility or liability. The statement here above does not extend to or apply to the procedures subject to unintentional contamination, misuse, neglect, accident, impro