JKSimMet Software (windows buttons).ppt

JKSimMetSoftware (windows buttons) Split Engineering Chile Ltda. Eduardo Marquina #3937 oficina 1201 Casilla 19158 - Correo 19 Vitacura - Santiago, CHILE Fono: (56)-(2)-2064674 Fax : (56)-(2)-2064668 http://www.spliteng.cl Working with Projects: Load a Project Working with Projects: Save a Project Build a Flowsheet: Add Equipment Build a Flowsheet: Flip an Equipment Unit Build a Flowsheet: Join Units with a Stream Build a Flowsheet: Add Annotation Blocks Edit Flowsheet Data: Edit Equipment Data Edit Flowsheet Data: Edit Port Data Simulate Using the Results:View the Results Using the Results:Graph the Results Using Simulation Output:Report the Results Using Simulation Output:The Results Overview Getting On-Line Help Contacto Split Engineering Chile Limitada Teléfono : (56) (2) 2064674. Fax : (56) (2) 2064668. E-mail : info@spliteng.cl Web : www.spliteng.cl * * Split Engineering LLC. 110 S. Church Avenue, Suite 8312 CP 85701 Tucson Arizona, USA Fono: (1)-(520)-3273773 Fax : (1)-(520)-3267532 Review 1.2 of the 01-07-06 Previously saved projects appear in a list A project is loaded by dragging the red “project book” on to the workspace At the start of a JKSimMet session, the user selects to load a previously saved project or a default blank project This toolbar appears once a flowsheet is loaded The default project has a blank flowsheet that can then be added too Flowsheet name The user can save the project at any time using standard Windows file commands and buttons JKSimMet will ask the user for a file name and where the file should be saved to Equipment is added by right-clicking on the flowsheet and selecting “Add” from a menu A list of equipment is displayed The equipment can now be dragged from this list on to the flowsheet by the user The unit now faces the other way An equipment unit can be made to face the opposite direction by right-clicking and then selecting “Flip” f