肥皂盒的模具設计书论文.docVIP

摘 要 本文是关于注塑模具的设计，在正确分析塑件的结构，技术要求及企业的生产实际情况后进行塑件的注射模设计。分别对的性能，塑件结构特点分析后，采用了口进行浇注，以及注射机的选用，分型面的选择，型腔数目的确定，成型零部件的结构设计以及相关的计算并配有图例来加以说明。用CAD软件对模具进行设计、分析、绘图。其核心知识是塑料成型、材料成型技术基础、机械设计、塑料成型工艺、计算机辅助设计、模具CAD等。 ABSTRACT This article is about the soapbox mold design, plastic parts in the correct analysis of the structure, technical requirements and actual situation of production after the injection mold plastic parts design. Respectively Polypropylene performance analysis of structural characteristics of plastic parts, the use of points for pouring gate, as well as the choice of injection machine, the choice of parting surface, the determination of the number of cavity, forming the structural design of components, with a legend to be described. The use of CAD software for mold design, analysis, graphics. The core knowledge is the plastic mold, molding material and technological base, and mechanical design, plastic molding technology, computer-aided design, CAD, such as mold. Through this design may to cast the mold to have a preliminary understanding, notes in the design certain detail question, understands the mold structure and the principle work, The design should be certification, Primarily related to the injection machine of important parameters the certification including die close thickness sizes, the name distance, injection machine of the die drae force and so on. After checking qualified , the molding parts machining process design must ensure that the quality of Supervision taking into account the economy. KEY WORDS：polystyrene，injection mold, soapbox , pouring system, parting surface 目 录 第1章 绪 论 1 1.1塑料的组成及特性 3 1.1.1塑料的含义及分类 3 1.1.2 塑料的组成 4 1.1.3 塑料的特性 4 1.2 注射模成型原理及工艺特性 5 1.3主要塑料的性能参数 5 1.4 聚苯乙烯的工艺性能 6 1.5 选题的目的意义 7 第2章 注射成型工艺及注射机的选择 8 2.1 塑件三维图及基本尺寸 8 2.2工艺分析 9 2.3 注射成型基本过程 9 2.4注射机的分类 10 2.5注射机的选用 11 2.6注射机工艺参数的校核 12 第3章 成型零部件件的模具设计 13 3.1型腔数目的确定 13 3.2分模面的选择 14 3.3浇注系统的设计 15 3.3.1浇注系统 15 3.3.2主浇道设计 16 3.3.3浇口套的选择 17 3.3.4分浇道设计 17 3