空间多孔加工的组合机床主轴箱设计大学学位论文.doc

摘要 这种空间多空孔加工组合机床是我们常见的一种专用组合机床，它是由系列化以及标准化的通用部件和按照被加工零件的形状以及加工工艺要求、数据大小而设计成的专用部件所组成。 设计中的主轴箱的设计是这次设计任务的重中之重，也是最关键的部分当然它也是我们常见的组合机床中重要的部件之一。首先它是由我们所熟悉的通用部件，按照被加工零件的加工要求，根据专用要求设计的。举个例子就是加工拖拉机侧支架上的12个孔，就是一种加工空间多孔的组合机床的一种体现 。而这次的加工任务是机床也是以其为例。主轴箱是组合机床重要的专属部件，它是根据加工示意图所确定的工件加工孔的数量和位置、切削用量和主轴类型设计的传递各主轴运动的动力部件，与此同时为了提高生产效率以及降低劳动强度。 本文依据的主轴箱的设计原则完成了对结构型式的选择以及动力计算，传动系统的设计以及计算，主轴箱坐标计算，主轴箱的总图设计和液压部分的设计。并以此绘制加工的工序图，加工示意图以及卧式双面组合机床的各部件的尺寸图。整篇说明书全部依据了现行的国家标准以完成。 关键词： 组合机床； 主轴箱； 传动轴  Abstract The pupil hole processing combined machine tool is our common a special combination of machine tool, it is by the series and standardization of the general components and in accordance with the requirements of the processing parts of the shape and processing technology, size of the data and design of special components. Is a new and very useful form of machine tool. And the number of exclusive tractor design in the design of spindle box design is the task of top priority, but also the most important part of the course, it is our common modular machine tool is an important component of. First of all, it is we are familiar with the general parts to be machined parts processing requirements, according to the special requirements of the design. Give an example is the processing side bracket 12 hole, is a kind of processing the porous space combination machine tool of a kind of expression. And the processing task is the machine is also in the case of the spindle box of modular machine tool is an important part, it is based on the processing schematic diagram to determine the workpiece hole position, cutting dosage and Spindle type design of the transfer of the spindle motor power components. At the same time in order to improve production efficiency and reduce labor intensity. This special design the with double-sided drilling and space multi drilling machine combination and corresponding special fixture. On the basis of the spindle box design principles completed the structure type