Gauge pressure level transmitter.pdf

LMP633 Submersible level transmitter is designed for dealing with the most severe demanding level measurement conditions. The sensor adopts the most advanced micro-processor technology with comprehensive linear error compensation and temperature error compensation to assure the highest precision of measuring result. The probe adopts full potting condensation- preventing technology, safe and reliable dual-seal design and fully welding technology with solid stainless steel body to assure long term stability and permanent air tightness. Signal transmitting module adopts transient voltage resistance protective circuits to assure operation regularly even under the harsh surge voltage environment. The seal of the cable adopts intensive cone plug sealing design to assure the long working life even under large mechanical load conditions during the installation and long-term use. LMP633 Submersible level transmitter is the optimal choice to satisfy all of high demand level measuring applications. Approvals . 1 . Field of applicationMain parameters Measuring medium Pressure types Gauge pressure Measuring range 1mH2O-200mH2O, please refer to the ordering information chapter Output signal 4-20mA、4-20mA+HART、 Modbus-RTU/RS485, customer Reference accuracy ±0.5% URL, optional ±0.2% URL Liquid, gas, or steam level, density and pressure Pressure, level LMP633-BCT capacitive ceramic submersible gauge pressure transmitter Submersible Level Transmitter 201 . .V1.06 05 Description Product introduction Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve Stand thread installation Anti-corrosive flange installation . 2 . Nominal value Smallest calibratable span Lower range limit (LRL) Upper range limit (URL) Overload limit 20kPa 10kPa 0kPa 20kPa 600kPa 40kPa 20kPa 0kPa 40kPa 600kPa 100kPa 40kPa 0kPa 100kPa 1MPa 200kPa 100kPa 0kPa 200kPa 1.8MPa 400kPa 200kPa 0kPa 400kPa 2.5MP