hygienic pressure level transmitter.pdf

Approvals . 1 . Field of application Measuring medium Pressure types Gauge pressure Measuring range 3kPa-30kPa, please refer to the ordering information chapter Output signal 4-20mA、4-20mA+HART, customer Reference accuracy ±0.2% URL, optional ±0.5% URL Liquid, gas, or steam level, density and pressure Pressure, level SMP858-TSF Monosilicon gauge pressure transmitter Description Product introduction Sanitary pressure transmitter, designed for food and pharmaceutical industry, is suitable for CIP/SIP cleaning and sterilization. Smart compact design, the welded process diaphragm medium parts is made of high quality stainless steel 316L.roughness≤0.4um, filling fluid with hygiene standard, in line with FDA certification variety of international standard process connections are available.　 Sanitary pressure transmitter vertical installation horizontalinstallation 2016.12.V1.0 Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve Main parameters . 2 . Nominal value Smallest calibratable span Lower range limit (LRL) Upper range limit (URL) Overload limit* 6kPa 3kPa 0kPa 6kPa 12kPa 40kPa 6kPa 0kPa 40kPa 60kPa The unit of the measuring range above can be converted into kg/cm2、 MPa and kPa. Provide other measuring range according to requirements. Adjust requirements: lower range value (LRV) and upper range value (URV) can be adjusted within the scope of the upper and lower range limit, minimum measuring range≤| URV - LRV |≤maximum measuring range. *Limit value of overpressure: depends on the pressure value of the parts with lowest pressure capacity 　 Measuring range and limit Test standard: GB/T28474 / IEC60770; Zero based- calibration span, Linear output, Silicone oil filling, 316L stainless steel isolation diaphragm.4-20mA analog output Standard specifications and reference conditions Performance specifications Including linearity, hysteresis and repeatability