Mooncell Receiving Card VCSG3-V23D.pdf

Mooncell Shenzhen Mooncell Electronics Co., Ltd. Address:Shenzhen IC Design Application Industrial Park Tel：075523975637 Receiving Card VCSG3-V23D Specs 一．Product Introduction Mooncell VCSG3-V23D is a Universal Receiving Card. 二．Product Features: 1. It conventionally has 16 sets of RGB Output, which can be extended to 32 Sets. 2. The maximum output of the RGB is 21 sets 3. One single card Connection in series can get 64sets of RGB output, which can be extended to 128 4. The maximum pixel that one can could load is 64K, each set of the data could load 8k pixel. 5. Input voltage: 3.5V--6V 6. High Refresh rate, high brightness and high gray grade with common IC (Driver). 7. Dual backup for the network Cable 8. To get the single pixel calibration without decreasing the pixel load area 9. Variety of Drivers are supported. It supports PWM IC, Point by point Detecting IC and Conventional IC. 10. It supports to save the settings beforehand. 11. It supports to monitor all the parameters of the receiving card. 12. It supports to monitor the environment. Mooncell Shenzhen Mooncell Electronics Co., Ltd. Address:Shenzhen IC Design Application Industrial Park Tel：075523975637 13. Intelligent recovery function, swapping the receiving cards without the need of loading all the data again. 14. Companied with Mooncell Intelligent Power Supply (two power supplies as in parallel connection, Sharing current, short-circuit protection) you will never ever get black screen. 15. It conforms to the RoHs and CE-EMC Standards. 二．The definition of the output port Definitions of Two 50P Ports: Mooncell Shenzhen Mooncell Electronics Co., Ltd. Address:Shenzhen IC Design Application Industrial Park Tel：075523975637 Note : 1.E/DECHA Signal, it could be used as the blanking control when the display scan line less than 16, and it will be the E Signal while that’s more than 16. 2.Pin