ProE- 鞋子教程.pdf

+Standard ISDX tutorials 2001 Shoe tutorial This tutorial was designed to be used with an instructor. tutorials may be used on an internal Intranet site. These tutorials were however designed and meant to be left behind for individual learning. The primary purpose of this tutorial is to act as a reminder for those who went through our training workshop. +Model Na There is one style feature in this tutorials +Commands to use Bounding box Pro/SURFACE Approximate composite curves Pro/SURFACE Surface Trims using Quilt Pro/SURFACE Sweep Pro/SURFACE Merge Style Features curves +To Start Bounding box is the underlying structure of this shoe so that different shoe sizes can be built maybe with Family Tables or Pro/PROGRAM +Layout Curves Layout curves should always locate themselves to the original bounding box. example to the left. +Note The inside ring will later be projected onto the insole Free Form surface in a later step. +Pro/SURFACE extrude Free Form Surface Manipulation tool in the next example will utilize this surface for deformation. +Note The 3.00 dimension is held with a relation to the equivalent +Free Form using Pro/SURFACE Free Form Surface Manipulation insole. Although outside of this ISDX workshop, this tool is your instructor share a few tips for utilizing this powerful feature. +Network of Curves Highlighted in red on the left is surface Pro/SURFACE Feature #28 while on the red curve feature on the right is feature #29. The Free Form surface shown shaded in purple. +Pro/SURFACE type curves By Mixing it up it is our hope to find the strengths and weaknesses of Pro/SURFACE and ISDX. using Pro/SURFACE curves and Approximate Curves Have you instructor work with you. +Approximate Composite Curve Use Pro/SURFACE approximate Composite curves for this example. +More Approximate Composite Curves Use Pro/SURFACE approximate Composite curves for this