Technical Note for Agilent 1100 Series Autosampler Door Upgrades.pdf

s1Technical Note for Agilent 1100 Series Autosampler Door UpgradesBeginning with serial number DEthe G1329A Agilent 1100 Series Thermostatted Autosampler is supplied with an improved transparent door assembly. An opaque version of the assembly for samples that require protection from light is also available. Both G1329A Agilent 1100 Series Thermostatted Autosamplers and G1313A Agilent 1100 Series Autosamplers with the previous door assembly installed can be upgraded to the new versions. The tables below give details of what parts are required and what procedures must be followed when installing the new door assemblies or when upgrading autosamplers with the previous door assembly installed to the new version.? Copyright Agilent Technologies 2000 1 Technical Note for Agilent 1100 Series Autosampler Door UpgradesTable 1 Agilent 1100 Series Autosampler Door Upgrades Action Module Parts Required Procedure Install the new transparent door G1329A From serial number D None. Transparent door ships with the G1329A. Clip the transparent front door onto the left side door. Install the new opaque door G1329A From serial number D G1329-68708 Light Protection Kit Remove the transparent front cover. Remove the top cover. Remove the transparent side door from the left cover panel. Clip the opaque side door onto the left cover panel. Install the top cover. Clip the opaque front door onto the left side door. Install the opaque front cover. Install the external tray G1329A From serial number D None. Insulation cover ships with the G1329A. Remove the front cover. Remove the top cover. Remove the side door from the left cover panel. Clip the insulation cover in place. Install the top cover. Install the extended tray. Install the front cover.2 Technical Note for Agilent 1100 Series Autosampler Door UpgradesClip on the transparent front door. Remove the front cover. Remove the top cover. Remove the transparent side door