伏马特VVVF-4+门机说明书.pdf

Rev.: 09.2004ACMAC1 ASSEMBLING INSTRUCTIONS AND REGULATION OF CABIN DOORS *ACMAC1* 2 CABIN DOORS PARTS DESCRIPTION 3 SITUATION OF THE OPERATOR IN THE CABIN 3 ADJUSTMENT OF CLEAR OPENING IN CENTRE PARTING DOORS 4 ADJUSTMENT OF CLEAR OPENING IN SIDE OPENING DOORS 4 INSTALLATION OF GUIDE SHOES AND HANGERS 5 ADJUSTMENT OF PANELS 5 ADJUSTMENT OF WHEELS 6 LANDING DOOR COUPLING 6 CORRECT ADJUSTMENT BETWEEN CLAMP AND RETAINER 7 LOOKING DEVICE 7 ELEMENTS SITUATION 8 VVVF-4+ MODULE PROGRAMMING 10 INPUTS 11 PROGRAMMING EXAMPLES 14 CHARACTERISTICS PAGE 15 DECLARATION OF CONFORMITY 16 INDEX 3CABIN DOORS HL + 220 SITUATION OF THE OPERATOR IN THE CABIN PARTS DESCRIPTION HL + 22 0 22 0 HL 1o Place the brackets in the guide tracks situated in the cabin roof. 2o Place the operator 220mm. higher than the clear height of the cabin (fi g. 1). 3o Tighten the operator to the brackets (fi g. 2). 4o Let 30mm. between the front part of the cabin and the outside of the operator regulated with the brackets (fi g. 3). 5o Fix the brackets in the guide tracks. fi g. 3 fi g. 1 fi g. 2 Side Cabin Door 1 3 2 5 4 67 Central Cabin Door 1 3 2 65 4 7 1 - Fixation bracket 2 - Operator 3 - Plate 4 - Panels 5 - Tread 6 - Tread support 7 - Toe guard 4 CABIN DOORS X* = = ±1 0 ADJUSTMENT OF CO. IN CENTRE PARTING DOORS ADJUSTMENT OF CO. IN SIDE OPENING DOORS ±3 0 PL + 1 5 25 Slow plates: 1o Place the slow plates at the operator extremes. 2o Check that distance between them is CO + 40mm. 3o Tighten the air cord clamps (fi g. 2). Fast plates: 1o Place the fast plates in fl ush position with the slow plates. 2o Tighten the air cord clamps (fi g. 2). Adjust the opening of the door by the slots of the top of the hanger plates. * X = Distance between plates with a closed door + CO + 15mm. (formula for operators with automatic landing doors). * X = Distance between plates with a closed door + CO (formula for semiautomatic landing doors). fi g. 2 1o Place the fl ush plates in open position. 2o Check t