EG-Declaration example_KE_seat_control_valve-1935_2004_e.pdf

EG-Declaration of Conformity The manufacturer Schubert Salzer CONTROL SYSTEMS GmbH Bunsenstrasse 38, 85053 Ingolstadt Declares that the products Seat Valve Type 7020,7036,7037 conforms to the requirements embodied in the directives (EG) Nr. 1935/2004 of the EUROPEAN PARLIAMENT AND COUNCIL (about materials and parts that are in contact with food) dated October 27th 2004 For the specific intended use, the overall migration and specific migration are below the legal limit, according to Directives 82/711/EEC and 85/572/EEC. The Certificate of Conformity refers only to the valves according to the drawing R-0246e with the following materials: Seating seal: PTFE (Fi0506) Guiding rings: PTFE, filled with carbon (Fi5220) Packing: PTFE , filled with carbon (Fi5220; Fi5210) Headsection seal: Graphite (Standard: Sigraflex Universal) or KLINGERSIL?C4430 The compliance with the directive 1935/2004 must be explicitly stated in the order code of the valve (coding). Declarations of Conformity for the individual materials used can be requested from the manufacturer. Ingolstadt, 12.11.2013 ____________________ ___ Dr. Rainer Lange, Gesch?ftsführer 16.04.2013 revised: designed: Botzenhart R0246e for food according to Regulation (EG) 1935/2004 name: Material specification for Angle Bodied Seat Control Valves Guiding ring: PTFE (carbon) - Fi5220 Head section seal: Graphite - Sigraflex Universal or KLINGERSIL?C4430 Seating seal: PTFE - Fi0506 Thrust collar: PTFE (carbon) - Fi5220 conical seals: PTFE (carbon) - Fi5210 Supporting ring: PTFE (carbon) -Fi5220 Greased with: Rivolta F.L.A. (NSF H1) Bonded with: Loctite 638 (NSF P1) Greased with: Bel-RAY NO TOX SILICONE VALVE SEAL LUBE (NSF H1) Packing underneath! Piston rod, disc, control cone 1.4571 Head section 1.4408 Body: 1.4408 11.11.2013 Herstellerbescheinigung Die SGL TECHNOLOGIES GmbH als Lieferant des Graphitmaterials ?SIGR