HDMI协议分析仪-深圳市锐测电子科技有限公司.pdf

K e y f e at u r e s + b e n e f i t s Data Island Decoding Decodes all metadata, control data, data islands, infoframes and auxiliary channel data, etc. Decodes audio sample packets—including the decoding of the Channel Status Bits and the control bits. HDMI and MHL Protocol Decoding Decodes protocol data such as guard bands and preambles. Enables diagnosing protocol compliance test failures. HDMI DDC Data Decoding Decodes all DDC transactions including EDID reads and HDCP authentication. You can view HDCP registers in human readable text and pinpoint failures in authentication. MHL C-Bus Data Monitoring Enables monitoring of MHL C-Bus transactions either passively between an MHL source and an MHL sink or while emulating an MHL sink device. Real Time Monitoring Mode View and monitor the incoming video image and metadata using the new Real Time monitoring mode. You can monitor all the data island data including infoframes and the DDC transactions and MHL C-Bus transactions. Capture Playback The Playback function enables you to make a capture from any HDMI or MHL source device and play it back to an HDMI or MHL sink device under test. Passive Monitoring Captures and decodes video, metadata, control data and protocol data passively between a source and a sink device up to 300MHz if the content from the source is not HDCP encrypted. If the source content is encrypted, only the DDC, CEC, MHL C-Bus and timing parameters are captured. Encrypted Link Analyzer (Optional Feature) Monitor or capture and analyze HDCP encrypted protocol data transmitted between a source device and sink device up to 300MHz. All metadata, audio and timing data can be monitored or captured even when the content from the source is encrypted with HDCP content protection. HDMI Source Compliance Test (Optional Feature) Supports testing of HDMI source devices for compliance to Sections 7.4 (Protocol), 7.5 (Video), 7.6 (Audio), 7.7 (DVI) and 7.8 (Advanced Features) of the HDMI CTS 1.4