FamosaReliability.docVIP

Famosa Reliability Safety Operation Procedure Famosa可靠性和安全操作规程 TITLE: PLASTIC BAG AND SHEET/SHRINK FILM （标题:塑料袋和表/收缩薄膜） 1.0 PURPOSE 目的 To establish general requirements for polybags and film sheet thickness to minimize potential suffocation hazards. Also to define what relative Warning Statement should be shown on respective polybag. Meeting the requirements of this procedure will ensure conformance to European requirements, CPSC, Australia and Canadian regulations.建立通用要求塑料袋和表/收缩薄膜厚度最小化潜在的窒息危害。还定义了相对警告声明应显示在各自的胶袋。会议的要求,这个过程将确保符合欧洲要求,消费者产品安全委员会、澳大利亚和加拿大的法规。 2.0 SCOPE EXEMPTION 范围和豁免 2.1 The procedure is applicable to flexible plastic film bags (including bubble wrap bag) and flexible plastic film sheets used as packaging materials or used with toys程序适用于灵活的塑料薄膜袋(包括泡沫包袋)和灵活的塑料薄膜表用作包装材料或和玩具一起使用的 2.2 Exemption豁免 A. Shrink film of less than 0.00150 inch nominal thickness which is in the form of an overwrap that would normally be destroyed when the package is opened by the consumer. 收缩薄膜的公称厚度小于0.00150英寸它的形式是一个外包装,通常包装会被销毁当被消费者打开时。 B. Plastic bags made of net or mesh material. 塑料袋由净或网状材料。 3.0 TEST EQUIPMENT测试设备 3.1 Micrometer with a friction or ratchet thimble. 测微计有摩擦或棘轮顶针。 3.2 Any measuring device (ruler) with a resolution of at least 1.0 mm任何测量装置(统治者),分辨率至少1.0毫米 4.0 TEST PROCEDURE测试程序 4.1. Measuring opening perimeter打开周边测量 4.1.1 Open sealed plastic bags and partially-closed sheet films along the longest edge to form a single sheet, avoiding obvious stretched, taped or creased areas. 打开密封的塑料袋和部分封闭片电影沿着边缘形成一个最长单表,避免明显的拉伸,压胶或有皱纹的地区。 4.1.2 Measure the width and depth of the plastic bag. 测量塑料袋的宽度和深度。 Note: Opening perimeter/circumference means the side which the consumer is likely open. On a completely heat sealed bag, this is the longest side. On a bag that is taped or stapled, it is the side that is taped or stapled. 注意:打开周边/周长意味着侧消费者可能开放。在一个完全热密封袋,这是最长的边。在一个袋子上是压胶或合钉封口,它的一侧是压胶或合钉封口。 4.2 Measuring thickness of sheet film测量厚度的片膜 4.2.1 Cut along the seams of plastic bags,