A 13.56 MHz 40 mW CMOS High-Efficiency Inductive Link Power Supply Utilizing On-Chip.pdf

下载文档

6
0
约4.27万字
约 11页
2017-04-11 发布于江苏
举报
版权申诉
保障服务

A 13.56 MHz 40 mW CMOS High-Efficiency Inductive Link Power Supply Utilizing On-Chip.pdf

1、本文档共11页，可阅读全部内容。
2、有哪些信誉好的足球投注网站（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。

A 13.56 MHz 40 mW CMOS High-Efficiency Inductive Link Power Supply Utilizing On-Chip

IEEE JOURNAL OF SOLID-STATE CIRCUITS, VOL. 49, NO. 11, NOVEMBER 2014 2397 A 13.56 MHz 40 mW CMOS High-Efficiency Inductive Link Power Supply Utilizing On-Chip Delay-Compensated Voltage Doubler Rectifier and Multiple LDOs for Implantable Medical Devices Chung-Yu Wu, Fellow, IEEE, Xin-Hong Qian, Student Member, IEEE, Ming-Seng Cheng, Yu-An Liang, and Wei-Ming Chen, Member, IEEE Abstract—In this paper, a 13.56MHzCMOSnear-field inductive link power supply (ILPS) that can deliver 20mAoutput current for implantable medical devices (IMDs) is proposed and fabricated. In the proposed ILPS, the pair of inductive link coils is constructed in the spiral shape with a ferrite core to save space and increase ef- ficiency. Experimental results have shown that the near-field coils can transmit power at the resonant frequency of 13.56 MHz with the transmission efficiency up to 76.3%. The CMOS power regu- lator is composed of active voltage doubler rectifier (VD) and low- dropout regulators (LDOs). In the active VD with the comparator, the input offset voltage is adjustable for delay compensation and a start-up control circuit is added to achieve robust start-up mecha- nism. On-chip delay compensation control with SR-latches is pro- posed to prevent from error glitch switching on offset voltage con- trol and achieve accurate delay compensation so that the reverse current conduction can be avoided and the efficiency can be in- creased. Three fully-integrated LDOs with rectifier output voltage of 2 V to 1.8 V are realized for analog (ALDO), digital (DLDO), and reference-voltage (RLDO) circuits. Thus the performance of individual LDO can be optimized. The measured output ripple voltage of the active VD is 10.4 mV. The power conversion effi- ciency (PCE) is 85% under 20 mA output current. The measured dropout voltage is 384 mV. As compared with other designs, the proposed ILPS has lower ripple voltages, lower dropout voltage, and higher PCE. Index Terms—Active voltage doubler rectifier, f