水桶造型设计与注塑模具设计_毕业设计.doc

密级： 学号： 本科生毕业设计（论文） 水桶造型设计与注塑模具设计 学 院： 机械工程学院 专 业： 机械设计制造及其自动化 班 级： 12本机械设计2班 学生姓名： 指导老师： 完成日期： 摘 要 注塑成型模具是当今社会发展最快，应用最广泛的技术之一。因此，对于注塑模具的研究对当今世界发展有着重大的意义，同时对产品质量的提高也有着深远的影响。本设计介绍了胶桶注射成型的基本过程。一个完整的模具设计进行了详细的介绍，例如分型面，推杆机构等都将它们的工作原理，设计构造，工作流程等完美的介绍了出来，而且还在其中附有插图。 论文的完成运用了CAD二维制图，UG三维制图等，所以，水桶的造型全部通过三维制图完成，其中还将线条和三维模型展现出来，造型接下来就是侧向轴心机构的设计，分别介绍了其设计原则，设计长度以及定位等等。最后，在浇注系统，推出系统，冷却系统的构造，原理，要点以及工作流程也进行了文字叙述，其中还附上了二维图，使整个设计过程更加美观，结构更加鲜明。 关键词：注塑模；胶桶；UG；造型设计 Abstract Injection mold todays society is the fastest growing, most widely used technologies. Therefore, the study of injection molds for the development of todays world of great significance, while improving product quality also has a profound impact. This design describes the basic process of injection molding of plastic buckets. A complete mold design has been described in detail, for example, sub-surface, the plunger mechanism and so will they work, construction design, the perfect introduction to the work processes, etc. out, but also where accompanied by illustrations. Complete paper using the CAD 2D drafting, UG three-dimensional mapping, etc. So, bucket shape all through the three-dimensional mapping is completed, which will show up lines and three-dimensional model, the next step is modeling the lateral axis mechanism design, introduced its design principles, design and positioning, and so on length. Finally, in the casting system, exit the system, cooling system structure, principles, elements and work processes have also been described in the text, which also attached a two-dimensional map of the entire design process, more beautiful, more distinctive structure. Keywords: injection molding; rubber tube; UG; design 目 录 绪 论 1 第1章 注塑模结构 3 1.1注塑成型原理及注塑过程 3 1.2