TRF——涂层厚度测试报告.docVIP

TRF012—2010Test Report (测试报告) Dongguan New Shengda Lighting Co.,Ltd. (东进照明有限公司)Thickness of galvanic plating test (电镀层厚度测试) Tested by (测试人):Checked by (审核人):Approved by(批准):Edited by(编制):  Test report No.: Appliance (产品名称):Photos of sample (样品照片):Rating (额定参数):Supplier.(供应商):ERP No. or new sample (物料编码或新测试样品):Quantity of test samples (测试的样品数量):Date (日期):Test mothod (测试标准): According to the signed contract between EGLO and supplier (根据供应商的合同)Test purpose(测试目的): To check the material whether compliance with requirement of EGLO(检查材料是否符合要求).Type of plating(镀层种类): □Ni/Fe □Ni/Cu/Fe □Cr/Ni/Cu/Fe □Cu/Ni/Fe □CuZn/Ni/Fe □Zn/Fe Others (其他种类): □Plating (镀层) Thickness (μm)CrNiCuCuZnZnAlResult (结论)： □Pass (合格) □Fail (不合格)Conclusion (结论): □镀层厚度太薄(The thickness of galvanic plating is too thin) □镀层厚度不均匀和不稳定(The galvanic plating is not uniformity and stable) □镀层厚度符合要求(The thickness of galvanic plating complied with the requirement)Remark (备注): 来货数量（Imported quantity）：