DIVISION-CONVEYINGSYSTEMS.docVIP

DIVISION 14 - CONVEYING SYSTEMS SECTION 14245 - HYDRAULIC ELEVATORS PART 1, GENERAL 1.1 SECTION INCLUDES A. These specifications are intended to cover the complete installation of the elevator plant in a first-class workmanlike manner and to include all work and material in accordance with the drawings as specified. All work and material shall conform to the requirements of the American Standard Safety Code for Elevators, dumbwaiters, and escalators, latest edition, the National Electric Code, and any local codes which may govern the Requirements of installation. Equipment to be hole less, in which the pistons run up each side of the car. 1.2 REFERENCES A. The Americans with Disabilities Act. (ADA) B. ASME/ANSI A17.1 2002 Safety code for elevators and escalators. C. ASTM A 36 - Structural Steel D. ANSI/NFPA 70 National Electric Code. E. ASTM A167 Stainless and Heat-resisting Chromium- nickel steel plate, sheet and strip F. ASTM B221 Aluminum and Aluminum, Alloy extruded bars rods wire, shapes, and tubes. 1.3 SUBMITTALS A. Submit under provisions of Division 1. B. Product Data: Provide data on the following items: 1. Signal and operating fixtures, operating panels, indicators and phone system. Controller and motor drive including non-proprietary compliance. Complete door operating system. Elevator cab C. Shop Drawings: Indicate the following information: 1. Pump machine, controller, selector, and other component locations. Car, hoistway dimensions, rails, buffers, hoistway door sizes and location Rail bracket spacing and maximum loads imposed on building structure. Individual weights of Principle components and load reactions at points of support. Color selections for doors and cab finishes, fixture cut sheets, Electrical characteristics and connection requirements. 14245-1 1.4 QUALITY ASSURANCE Perform work in accordance with A