INNOLUXDISPLAYCORPORATION.docVIP

INNOLUX DISPLAY CORPORATION MT220WW01 V.0 LCD MODULE SPECIFICATION ( ) Preliminary Specification (_) Final Specification Customer Checked Approved by Approved by Checked by Prepared by MKT QRA TD PDM PD MKT Date: Innolux Display Corporation, No.160 Kesyue Rd., Chu-Nan Site, Hsinchu Science Park, Chu-Nan 350 , Miao-Li County, Taiwan Tel: 886-37-586000 Fax: 886-37-586060 Document Number: MT220WWW01 V.0-DR4-24(V.02) InnoLux copyright All rights reserved, Copying forbidden. Record of Revision Version Revise Date Page Content 01 2006-08-10 All Ini t ial release 02 2006-11-05 10 Update the range of T2 Value from 10~50(ms) to 0~50(ms) 12 Update the Clock Dclk period(Min.) from 13.9 to 12.2 Update the Clock Dclk frequency(Max.) from 72 to 82 13 Update the VL(Min.) from 767(Vrms) to 751(Vrms) Update the VL(Typ.) from 800(Vrms) to 788(Vrms) Update the VL(Max.) from 963(Vrms) to 946(Vrms) Update the VLstart(Max.) from 1330(Vrms) to 1270(Vrms) (T=25_) Update the VLstart(Max.) from 1730(Vrms) to 1660(Vrms) ( T=0_) 15 Update Contrast ratio(Min.) from 600 to 700 15 Update Viewing angle(Min.) from 70/70/70/70 to 70/70/75/75 Update Viewing angle(Typ.) from 80/80/80/80 to 80/80/85/85 20/21 Revise ME Drawing 03 2006-12-14 8 Update Permissive Power Input Ripple(Max.) from 0.15V to 0.25V 12 Update the Horizontal TH_TOTAL (Min.) from 913 to 890 13 Update the VL(Min.) from 751(Vrms) to 758(Vrms) Update the VL(Typ.) from 788(Vrms) to 794(Vrms) Update the VL(Max.) from 946(Vrms) to 955(Vrms) Update the VLstart(Max.) from 1270(Vrms) to 1250(Vrms) (T=25_) Update the VLstart(Max.) from 1660(Vrms) to 1570(Vrms) ( T=0_) 15 Add Viewing angle (T/B/L/R) CR_5 85/85/89/89 (Typ.), 75/75/80/80 (Min.) Version:03 SPEC NO. MT220WW01 V.0 PAGE 3/23 ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. Contents: A. General Specification B. Electrical Specifications 1. Pin assignm