LT,MHL转RGB,HDMI转RGB,MHL接收,HDMI接收.docVIP

LT8619 HDMI/MHL Dual-mode Receiver Data Sheet 2. General Description The LT8619 is Lontium’s high performance HDMI/MHL dual-mode receiver chip based on ClearEdge? technology, compliant with the HDMI 1.4(High Definition Multimedia Interface) specification and MHL 2.0(Mobile High-definition Link) specification. The RGB output ports can support RGB888/RGB666/RGB565 format and the output resolution can support up to 4Kx2K resolution. With programmable scalar, LT8619 can do scaling up and down within 1080P 60Hz resolution. LT8619 integrates MCU and it has 10 GPIOs. For easy implement of a multi-media system, LT8619 supports 8-channel high quality I2S audio or SPDIF audio output. It integrates 4M bits nor-flash inside (option), and also you can use external nor-flash by SPI interface for compatibility. 2.1. Features ? Direct interface to HDMI V1.4 receiver ? Support MHL V2.0 on the same pins with HDMI ? Multiple pixel formats: RGB 6/8/10/12 bit per component (bpc); YCbCr 422/444 8/10/12 bpc ? High input sensitivity, with differential input level down to 80mV ? Receiver side equalization up to 12 dB ? Auto Loss of Signal detection ? High jitter tolerance up to 0.6UI ? HDCP decryption ? On-chip EDID ? Support resolution up to 4Kx2K@30Hz ? RGB888/RGB666/RGB565 output ? Fully programmable zoom ratios ? Independent horizontal/vertical scaling ? Color space conversion ? Integrated microcontroller for system level management ? Support ISP/UART programming debug interface ? External IIC and SPI interface ? Support I2S/SPDIF audio output ? Extensive power management for power savings ? Support total 10 GPIOs ? Integrated nor-flash(option) 2.2. Applications Figure 1 is the normal application diagram of the HDMI/MHL dual-mode receiver convert to RGB. It also includes a digital audio output interface. And HDCP is also support. 3. Functional Block Description Figure 3 is functional block diagram of LT8619, and the block detail internal relationship is also shown in the diagram. Each o