OperationofCPwithPressroomManager.docVIP

How to use the CP2000 with Prinect Pressroom Manager Login User in CP2000 and Press Center When job is available for press, you can load the job there. First, check that communication is good. A press operator has to be clocked in. In screen shot (Fig 1.1), nobody is clocked in. Make sure that you clock-in. Press “Confirm 確定” button (Fig. 1.2). (Fig. 1.1) (Fig. 1.2) Job Preparation Press the “Job任务菜单” button(Fig. 2.1) in the header. The Job menu appears. Press the Job preparation 任务准备button (Fig. 2.2). The Job preparation menu appears. Press the “Load a job輸入任务” button (Fig. 2.3). The Job preparation/load job window appears. Use the Data storage device button (Fig. 2.4) to select the “Workplace Interface” [1]. Press confirm [3] button. If not find the job in the list. Please press “Group 聯合” [2]. Press the “Confirm Job許可任务” button (Fig. 2.5). If the “Job Start开始生产”is dim gray (Fig. 2.6)(and can not be activated), the job can not be worked properly. Goto Shop Floor Data Collection (see above Fig. 1.1) and clock in with correct name (Fig. 2.7). and then press “Confirm確定” button. Press “Confirm 確定” button again. Start printing (Fig. 2.8). When you finish your job. Press the “Job End任务結朿” button (Fig. 2.9). (Fig. 2.1) (Fig. 2.2) (Fig. 2.3) (Fig. 2.4) (Fig. 2.5) (Fig. 2.6) (Fig. 2.7) (Fig. 2.8) (Fig. 2.9)