HyperMesh载荷集解释-RADIOSS (Bulk Data Format)- OptiStruct.doc

Load Collectors  HYPERLINK javascript:HMToggle(toggle,TOGGLE0186A2,$TOGGLE0186A2_ICON) RADIOSS (Bulk Data Format), OptiStructSpecific load collectors are used for specialized loading cards, such as EIGRL, SPCADD, GRAV, RLOAD, DTABLEi, etc. ?Specific load collectors have card images, which can be edited to do the following: ?Group other load collectors together for simultaneous application in a single subcase.?Provide special information for a specific analysis type (such as modal analysis, or frequency response analysis).General boundary conditions, listed above, should not be collected into specific load collectors. ?Organizing loads and constraints into a specific load collector may result in an error termination. The following is a list of RADIOSS (Bulk Data Format), OptiStruct cards, which are represented as Specific load collectors. Supported Cards Solver DescriptionSupported ParametersHyperMesh Notes HYPERLINK D:\Altair\hw10.0\help\hwsolvers\hwsolvers.htm \t _blankCMSMETHDefines the method, frequency upper limit, and number of modes to be used in component mode synthesis for flexibly-body preparation solution sequence.?? HYPERLINK D:\Altair\hw10.0\help\hwsolvers\hwsolvers.htm \t _blankDLOADDefines a dynamic loading condition for frequency response problems as a linear combination of load sets defined via RLOAD1 and RLOAD2 entries, or for transient problems as a linear combination of load sets defined via TLOAD1 and TLOAD2 entries.?? HYPERLINK D:\Altair\hw10.0\help\hwsolvers\hwsolvers.htm \t _blankEIGRLDefines data needed to perform real eigenvalue analysis (vibration or buckling) with the Lanczos Method.?? HYPERLINK D:\Altair\hw10.0\help\hwsolvers\hwsolvers.htm \t _blankFATDEFDefines elements, and associated fatigue properties, for consideration in a fatigue analysis.?? HYPERLINK D:\Altair\hw10.0\help\hwsolvers\hwsolvers.htm \t _blankFATEVNTDefines loading events for fatigue analysis.?? HYPERLINK D:\Alt