BEI编码器GHT5_1系列-GHT5_1.PDF

GHT5_1 INCREMENTAL ENCODERS, GHT5_1 RANGE GHT5S14 encoders are specially designed for motorist application – heavy industry ? ?14mm through shaft ? Easy mounting with DAC (Anti Coupling Device) ? Robustness and good resistance to shocks and vibrations ? High protection level IP65 ? Resolution up to 2 500 ppr ? Universal electronic circuits 5V RS 422 and Push Pull 11 to 30Vdc GHT5_14 connection G3R (cable output), DAC 9445/015* mounted on the bearing housing * to be order separately 58mm GHT5S14 encoders are designed to accept shaft sizes up to 14mm and can be mounted without fixation flange. Immobilization is achieved by a controlled deformation ‘’DAC’’ with 2 fixation points (ref : M9445/015, accossory to be order separately) which allows an axial misalignment (±2mm), angular (±3°) and radial (±0,2 mm). The ‘’DAC’’ also allows for ±10° of rotational adjustment for the alignment of the marker pulse, with the two ‘’DAC’’ oblong holes at 180°. The final mounting is realised with 2 CHC M3 screws CHARACTERISTICS Cover : zamac Shock (EN60068-2-27) 500 m.s-2 (during 6ms) Material Body: aluminium Vibration (EN6