上海电机学院毕业论文-某型温度计检测包装机讲述.doc

毕业设计 题 目某型号温度计检测包装机检包装构设计 学生姓名***学 号学 院机械学院专 业机械制造及其自动化班 级BJ1101指导教师二〇一五年五月 = 1 \* ROMAN \* MERGEFORMAT I 某型号温度计检测包装机-包装机设计 PAGE 1 摘要 本次设计中需要进行对温度计的组合与包装，它是通过由气缸、料仓式送料机构、机械手臂等机构，将各个料仓中的原材料运送至传送带，并于传送带上完成包括上料，下料以及组装等全部过程。整个加工过程基本可以实现自动化，只需要操作工人将温度计，以及温度计盒子等原材料分别放入不同料仓中，并将下料料斗处将成品送走即可。 本次毕业设计的主要任务是完成输送结构和上料结构的设计，本次输送结构是由皮带，调速电机，传动轴，机架等组成。输送结构包括滚筒、隔料器、气缸、推板等。本文完成整机的设计计算，包括电机功率的确认，主传动轴的校核等，最后完成二维工程图的绘制。 关键词：包装机构 输送带 二维工程图  = 2 \* ROMAN \* MERGEFORMAT II 某型号温度计检测包装机-包装机设计 Abstract The need for combination and packing of the thermometer in this design, it is through the cylinder, bin type feeding mechanism, mechanical arm mechanism, each in the storehouse of raw materials are transported to the conveyor belt, and belt including feeding, cutting and assembling process. The whole process can realize the automation, operation workers will only need a thermometer, and the thermometer box and other raw materials were put into different bins, and under the hopper will be sent to the finished product. The main task of this graduation design is to complete the design of structure and material conveying structure, this structure is composed of a belt conveyor, motor, transmission shaft, rack etc.. The structure comprises a roller conveyor, vibration feeder, cylinder, push plate etc.. This paper completed the calculation of the design, including the identification of motor power, the main transmission shaft was checked, finally completed drawing two-dimensional engineering drawings. Keywords: packaging machine conveyor belt of 2D engineering drawings = 4 \* ROMAN \* MERGEFORMAT IV 某型号温度计检测包装机-包装机设计 目录 TOC \o 1-3 \h \z \u   HYPERLINK \l _Toc25405 摘要  PAGEREF _Toc25405 II  HYPERLINK \l _Toc25692 Abstract  PAGEREF _Toc25692 III  HYPERLINK \l _Toc27368 目录  PAGEREF _Toc27368 IV  HYPERLINK \l _Toc22266 第一章 绪论  PAGEREF _Toc22266 1  HYPERLINK \l _Toc31571 1.1包装机械的意义  PAGEREF _Toc31571 1  HYPERL