动臂塔式起重机利勃海尔.docVIP

———————————————————————————————————————————————动臂塔式起重机利勃海尔 500 HC-L 16LUFFING BOOM TOWER CRANE stationary and travellingMorrow Equipment Hook Heights 10m 33 ft 5m 16 ft 0 5m 16 ft 10m 33 ft 15m 49 ft 20m 66 ft 25m 82 ft 30m 98 ft 35m 115 ft 40m 131 ft 500 HC-L 16 45m 148 ft 50m 164 ft 55m 180 ft 60m197 ft (70m) (65m) (55m) (60m) (50m) (45m) (40m) (35m) (30m) (25m) (20m) (15m) (10m) (5m) NOTE! By combining information from the graph above with data from the tower height chart on the adjacent page, hook heights can be deter-mined. It will be necessary to select boom length, boom angle and tower con?guration. Contact Morrow for additional information. Morrow Equipment Co., L.L.C. Direction of boom 500 HC-L 16 ?when climbing. PLAN VIEW – showing tail swing radius and minimum clearance. with 500 HC-L Tower Section on concrete slab with 500 HC-L Base Section on concrete slab T0WER HEIGHTS* NOTE! Information regarding crane equipped for rail travelling is available. Consult operation manual or contact Morrow. Morrow Equipment Co., L.L.C. 500 HC-L 1 6 maximum tower with 131 ft (40m) boom installed* Con?guration Iwith 500 HC-L tower FREESTANDING stationary *NOTE! Tower con?gurations illustrated above apply to cranes in which the out of operation boom angle is set at 70°. If the out of operation boom position is set at 15°, up to 2 additional tower sections may be added to tower con?gura-tion I, II and III. Consult operation manual. Contact Morrow for information regarding alternate tower con?gurations. Restrictions may apply. Morrow Equipment Co., L.L.C. Capacities 500 HC-L 16 70,550 lbs61,730 lbs52,910 lbs44,090 lbs35,270 lbs26,460 lbs17,640 lbs8,820 lbs70,550 lbs61,730 lbs52,910 lbs44,090 lbs35,270 lbs26,460 lbs17,640 lbs8,820 lbs70,550 lbs61,730 lbs52,910 lbs44,090 lbs35,270 lbs26,460 lbs17,640 lbs8,820 lbs15m